Features:
Products are exported to Japan， South Korea， the United States， is a highly intelligent NiMH NiCad fast charger can charge 1-8 AA / AAA rechargeable battery， which is 5 7 batteries， and through leading-DletaV 0 DletaV technology， but the charge does not charge less， the battery up to 98% saturation， single 2100mAH battery charging time is about 2 hours， 8 while full of about 5-6 hours， the main features are as follows:
1. eight fully independent charging slots that can support single or multi-section 5 of the 7th Hunchong.
2. battery capacity with discharge function to overcome battery memory effect， repair
3. powerful battery activation function， used batteries back to life
4. plus blue backlit LCD， charging status at a glance
5. anti-reverse function， inhibit misuse damaged charger
6. Temperature protection thermostat speed charging function
7. wide voltage 100-240VAC input range， universal
8. Overvoltage protection， overcurrent protection， timing shutdown function effectively inhibit battery overcharge issue.

Usage:
Charging: When powered on， the current default for the charge mode， directly into the battery， the display grid increments from the bottom to show that the battery is fully full grid display， automatically stop charging.

Discharge: Tap the blue function key one second after the release， the display grid from top to bottom cycle， the charging mode automatically after discharge.

Activation: dormancy caused due to excessive discharge of the battery， press the function key for 2-3 seconds after the release， slow display raster display from bottom to top， the battery into the active state， the charging mode automatically after successful activation.

Note: If the LED backlight sleep， press any key to turn on the LED backlight， ensuring the backlight turned on to operate the above functions.

Specifications:
1 Power Connector; DC Outer  5.5 mm， inner2.1*12mm
2 Input Power:DC 12V/1A min
3 AA NI-NH/NI-cd charge current: 2000±100mA
4 AAA NI-NH/NI-cd charge current: 850±50mA
5 AA/AA discharge current:1000mA Duty Cy:0.25
6 Discharge cut-off Voltage:1.0±0.05V
7 Trickle charge current : 30-50

Charging instructions:
1 Backlight color: Blue
2 Charging indicator approach
Each charging slot corresponding to the four LCD status indication， all bright saturated
The first grid: Charging saturation of 25%
The second grid: Charging saturation of 50%
The third grid: Charging saturation of 75
The fourth grid: Charging saturation above 90
3 Discharge instructions
The fourth division to the first division ring through display
4 Power no display:Standby

Control System:
1Charge Control: High accuracy MCU system
2 Charging a trial: Constant current pulse rechargeyour
3 The maximum charging time control: 8 hours
4 Saturation detection: —5 - 10
5 Chargers temperature control: 55C max
6 Work Environment: 0-40 degree

Specifications:
Input voltage range: 100-240v 50/60Hz
Output voltage range: 12v 0.1min
Charging voltage limit: 1.5v
Maximum output current: 2000mA
Charging voltage limit: 1.8v
Discharge cut-off voltage: 1.0v
Operating temperature range: -5- 35 Celsius
Size: approx 158x 100  30m
Charging saturation: 98%
Trickling Charge: approx 50mA
Charging way: pulse charge
Plug: US plug
Color: black
Net weight: 302g

Package includes:
1x Charger
1x Cable
2X Plastic Cases
1X Manual