The Newly Designed Blue Condenser Microphone Recording Mic with Shock MountFeature:1. Ideal for radio broadcasting studio, voice-over sound studio, recording and so on2. Tailored frequency response provides vocal intelligibility and crispness3. Neodymium magnet for high signal-to-noise ratio4. Features an angle adjustment with locking knob 5. Foam insert to hold and protect microphone 6. Standard screw adapter compatible with all the standard microphone stands 7. Ideal for radio broadcasting studio, voice-over sound studio, recording and so on 8. Shock Mount to reduces handling noise9. Computer equipped with independent sound card can be connected with a 3.5 mm plugholeNote: 1.This is a Condenser Microphone only work with the device that could provide enough power for it. 2. When connected with desktop computer, the Condenser Microphone could be used alone; When connected with laptop computer, please connect the laptop to electrical outlet, or use a 48V phantom power to get enough power if the sound is not clear and high enough. 4. If your device could not provide enough power, the sound volume recorded might be low, and please use a extra 48V phantom power adapter to connect it.(phantom power adapter is not included) 5. Can not be used with mobile phones and tablet computers. 6. A sound card could be used to help you get a better sound effect.7. In the process of recording, please put the microphone away from the amplifier to prevent recording noise due to amplifier. Kindly Reminder:You need a sound card plugged in for Windows 10 system.Specification: Polar Pattern: Omni-directional Frequency Response 20Hz-20kHz Sensitivity 45dB��1dB Output Impedance 1500����30%(at 1kHz) Load Impedance ��1000 �� Equivalent Noise Level 16dBA Electrical current : 3mAMicrophone Body Weight : 280g Size Approx.15x5x5cm/5.91x1.97x1.97inLength of Cable Approx.2.5m/8.2feet Color: BlueMicrophone Material Steel net+Zinc Alloy Hand Holding PartPackage Content:1x Blue Microphone 1x Shock Mount 1x Power Cord 1x Anti-wind Foam Cap 1x User Manual




![]()