Specifications:
1/10th 60A combo set is combined with 9T 4370KV brushless motor, 60A brushless ESC and program card. The ESC is designed for 1/10 scale RC car with the use of 2-3s LiPo battery and 4-8s NiMH battery.
When you connect the ESC with the program card, you could tune and tweak all your favorite settings, such as cut-off voltage, brake and punch strength, drag brake and other parameters that add up to an
incredible RC driving experience.
Features:
- Suit for 1/10 scale RC car
- High RPM precision bearings
- CNC machined billet T6 aluminum heatsink can
- High efficient heat transfer with a cooling fan
- High purity copper windings maximizes conductivity
- Precision engineered for maximum energy conversion
- Do ESC programming in a short time and get ready for next run
- High power and high efficiency combined with low weight and compact dimensions
Size:A
Motor Specifications:
- Brand: SKYRC
- Volt: 4370KV
- IO: 2A
- Max current: 48A
- Internal resistance: 0.0125
- Turns: 9T
- Length: 49mm
- Diameter: 35mm
- Shaft length: 15mm
- Shaft diameter: 3.17mm
- Connector: 3.5mm banana plug
ESC Specifications:
- Brand: SKYRC
- Input: 2~3S LiPo battery, 4~8S NiMH battery, 2~3S LiFe battery
- Motor support: <4500KV
- BEC: 5V/2A linear mode
- Constinuous current: 60A
- Burst current: 90A
- Plug: T plug
- Thermal overload protection: Yes
- Item size: 48 * 29 * 26mm (without cable)
Program Card Specifications:
- Brand: SKYRC
- Cut off voltage: Auto LiPo, none, 5V, 6V, 9V, 12V
- Auto-LiPo cut off: 3.0V, 3.1V, 3.2V, 3.3V, 3.4V, 3.5V
- Drag brake: 0%, 10%, 20%, 30%, 40%, 100%
- Brakes strength: 0%~100%
- Punch control: 0%~100%
- Reverse type: Reverese lockout, forward/brake only, forward/brake/reverse
- Motor timing: Lowest, low, normal, high, highest
Package List:
1 * SKYRC 9T 4370KV Brushless Motor
1 * SKYRC 60A Brushless ESC
1 * SKYRC Program Card
Size:B
Specifications of Motor:
- Brand: SKYRC
- KV: 4000KV
- Power supply: 2-3S LiPo battery
- Watts: 400W
- Rotor poles: 2
- Turns: 8.5T
- Resistance: 0.0142 Ohm
- Weight:165g
- Outer diameter: 36mm
- Length: 53mm
- Rotor: 12.5mm
- Shaft diameter: 3.175mm
Features of ESC:
- Less resistance, less heat, more effective
- Safety features: low voltage protection, motor and ESC overheat protection and signal lost protection
- Equipped with 6V/3A BEC, it doesn't need a separate receiver pack
- With Program Card, you could set cut-off voltage, brake and punch strength, drag brake and other parameters
- Built-in electronic ON/OFF switch
- Support both sensored and sensorless motors
Specifications of ESC:
- Brand: SKYRC
- Item size: 39 * 38 * 20mm (without cable)
- Item weight: 30g (without cable)
- Power supply: 2-3S LiPo battery, 4-9S NiMh battery
- BEC output: 6V/3A
- Constant current: 60A
- Burst current: 380A
- Resistance: 0.0007 Ohm
- Fan: 8V/0.2A, Max 12.6V
Features of Program Card:
- LED Program Card for CS60 60A Brushless Sensored ESC of SkyRC Sensored Brushless Power System Combo Set
- Simply connect it to the Program Card, you could do ESC programming in a short time and get ready for next run
Specifications of Program Card:
- Brand: SKYRC
- Item size: 80 * 52 * 6mm
- Item weight: 16g
- Cut off voltage: AutoLiPo, None, 5V, 6V, 9V, 12V
- Auto-LiPo cut off volts / cell: 3.0V, 3.1V, 3.2V, 3.3V
- Drag brake: 0%, 10%, 20%, 30%
- Brakes strength: 0%, 20%, 40%, 60%, 80%, 100%
- Punch strength: 0%, 10%, 20%, 30%
- Dead band: small, normal, large
- Reverse type: Proportional Rev.Lock Out, Proportional w/o Reverse, FWD to Brake and Reverse
- Motor timing (sensored only): none (0 ), low (10 ), middle (20 ),high (30 )
- ESC type: sensored or sensorless
- Motor direction: normal, reverse
Package List:
1 * SKYRC 4000KV 8.5T 2P Brushless Sensored Motor
1 * CS60 60A Brushless Sensored ESC
1 * LED Program Card