Product Description

The CoolForce 2 Rev. B is designed as an entry-level case for water cooling enthusiasts. Behind the front panel, there is enough space for 240 mm radiators or compact water cooling solutions. Under the top cover, users can install 360 mm radiators without any problems. The case front was reworked slightly, to offer the user an unhindered access to the dust filter and the front fans. The I/O-panel has been separated from the rest of the front, which allows to easily remove the front panel. The CoolForce 2 Rev. B offers many practical features, such as the Nanoxia AirCover and Nanoxia ModuWand (modular Wall). The ModuWand is one of the outstanding features of the case. If necessary, it can simply be removed to install longer video cards or it can be equipped with fans, hard drives or a reservoir / pump for a water cooling system. A fully modular HDD cage for two 3.5 inch hard drives can be found between the ModuWand and the front. They come with mounting rails to significantly expand the disk capacity, using our separately available HDD cages. Included are special SATA combination cables to allow the trouble-free installation of the hard drives on the ModuWand or on the 2.5 inch holders. In the CoolForce 2 Rev. B you have the possibility to install graphic cards with a length of up to 300 mm. By removing the ModuWand, cards with 430 mm installation length can be fit inside the case.

Feature

Mid tower case for entry level liquid cooling, with removable Modular Wall for easy mounting of fans, drives, reservoirs or pumps; Top panel air vent
Supports ATX, Micro-ATX, Mini-ITX motherboard, with maximum of 8 expansion cards, 9 case fans, 2 ODD, 4 HDD, 6 SSD, rubber vibration isolators,and 2 dust filters
Supports 3 radiators: 240 mm (front), 360 mm (top, low profile RAM required), 140 mm (rear), CPU cooler 185 mm, and graphics card 300 mm (430 mm without Modular Wall)
Pre-installed 3 x 3-pin fan controllers and 3 CoolForce fans so you can easily tune air flow vs sound level; Front fans and dust filters are bolted with 4 screws; 2 LED bars behind front panel; 1 tempered glass panel
Case dimensions 483 x 220 x 525 mm; Front ports 1 x USB 3.1 type C, 2 x USB 3.0, HD-Audio, LED on/off button; Cable management guides and straps behind motherboard; Cut-out holes for cooling pipes
Brand : Nanoxia
Item model num : NXCF2T
MPN(PartNumber) : NXCF2T
EAN : 0810540022949
Product Dimensions(LxWxH) : 49x23x53cm ; 11907 g

Attention for order international goodsAll items are delivered from oversea(USA,KOREA,JAPAN,Malaysia)DirectlyDelivery would be done local shipping company in country of Production Place and Qxpress or POST in singaporeTotal shipping takes 7~14 working daysThe item from the third country could take 2 week more than normal delivery in transitNo exchange or Return is Allowed because of simple mind change Such Return or exchange is ly allowed for the reason below Major defect is discovered Wrong item is Delivered If you want to retunr or exchage at you cost, kindly Contact us via email Please check when you return the item just for changing your mind, you could be charge return cost (orginal + return shipping , duty, and etc) You should let us know within 7 days from the date you received the item if you'd like to get a refund for the item About Votage of electronics The voltage of most electronics goods listed on our shop is 110V Need transfomer to use US electronics We cannot accept return for dameged electronic item because of not using transfomer