1. Multifunctional card reader including built-in LED, TF card slot, and a USB port.
2. Memory capacity can expand for enough one to share data.
3. Data backup with the reset key.
4. You can change the TF card and the maximum capacity can be up to 2T as you like.
5. Easy to take, convenient to use, oversimplified to install.

Material: plastic
Dimension: 4.4 x 3 x 1.3 cm (length x width x thickness)
TF card slot: up to 2T
USB 2.0 port: connect with power bank, computer, or USB socket, then card reader works
LED indicator (green): connect with USB port, the indicator lights up, which means WIFI card reader starts to work. After 10 seconds, indicator flashes frequently, now phone can be connected.

Download APP:
1. Scan two-dimensional code
2. Visit the official website
3. Application store

For IOS phone, download "zsun" from APP store and install it
For Android phone, download "zsun" from the application stores and install it

Connect phone with WIFI card reader:
1. Connect card reader with USB port, the indicator lights up. After 10 seconds, indicator flashes frequently.
2. Open the wifi setting interface of phone/tablet, search and connect wifi card reader "zsun-xxxx".
3. Enter software "zsun" to read the storage content (3 modes to choose)

Modes:
1. WIFI: under this mode, the storage content of wifi card reader is displayed through wifi connection.
2. USB flash disk: under this mode, the storage content is not displayed in APP. Connect it with computer via data cable, then the computer will display the content.
3. My device (phone/tablet): under this mode, the content of my device will be displayed.

Note: When WIFI function is not used, the card reader can directly connect with computer to read the content of memory card.

1 x WIFI card reader
1 x User guide
In box