Item Descriptions:

color:

black

Sophisticated functionality, slashing all waste, a sharp minimal pedal

One Control Minimal Series Pedal Board Junction Box is a tool for not wasting time in various situations such as stage and studio.

The function of this small box with two inputs and two outputs is very simple, but it creates a tremendous effect.

· If there is input and output on the pedalboard

Just connect the cable from the guitar and the cable to the amp like the one pedal like the effect pedal itself, the setting is completed.

Of course it does not take extra time even when you brush the stage.

· To use pedalboard effectively

Except for some expensive models, many pedalboards have a height at the edge of the board, so setting an effector at the end of the board will cause the plug of the cable to get caught on the rim and the pedal will float

Yes.

If you step on the foot switch in such a state, it can lead to breakdowns of cables and pedals.

Therefore, many pedal boards can only use the narrower range than the original size.

The Pedal Board Junction Box uses the input and output on the top side of the chassis so that it does not damage the cables even if they are placed in tight corners of the pedal board and use it without wasting space on the pedal board

can do.

Of course, because it is a very compact design, the Pedal Board Junction Box does not occupy the place of the pedal board.

· To prevent unnecessary troubles

The live scene is very busy.

Sometimes you can not be able to do things you can do as you normally do if you are in a hurry or impatience.

For that, I'd like to set as far as possible and set aside for live.

By using the Pedal Board Junction Box, you can move the input / output location according to the configuration of the stage without changing any placement inside the pedal board, so you can prevent unnecessary troubles.

· Prevent cable entanglement

In the live stage equipment is placed on the stage narrowly.

It is not unusual that the input of the amplifier is behind the guitarist or bassist on the right.

Since the normal pedalboard has inputs on the right and outputs on the left, it is common for cables to become entangled while moving while live.

The Pedal Board Junction Box allows you to position the input and output of the pedal board in the same position, so you can easily determine the placement of the cables to be crawled.

As a result, it also leads to prevention of cable entanglement on the stage.

· Fully passive design

No power supply is required for Pedal Board Junction Box.

It is neither like the LEDs shining nor changing the sound.

It is not a flashy pedal

It is a reliable tool that can stand at the edge of the board at any time and carry inputs and outputs collectively.

Features:

• Please enter model number Confirm this is compatible:
• Mini size, simple, low price realized Minimal Series
• Junction box which puts in / out of pedal board inputs
• Small size, ideal for small boards
• Fully passive design
• By design changes on the manufacturer side, design and color etc. on the appearance may change without notice.
• Please note.

Product information:

Shipping Weight: 158 g

Package Dimensions: 5.99 x 7.29 x 13.21 cm