Instruction: 使用说明：
It can placed on any smooth clean and dry surface like shelf, board, wood, cabinet, drawer, walls, window, glass and so on. It is best applied at room temperature.
本产品可以贴于任何平整，干净，干燥的物体表面，如：橱柜，木制品，抽屉，桌子，墙，窗户，玻璃等。本产品最好在室温下使用
1- Sand down rough surfaces prior to sticking. Clean large surfaces with mild soap and water.
本产品务必贴于光滑物体表面。若表面粗糙，请先用砂纸磨平，并且用水或中性洗涤剂洗净，以免影响使用效果。
2-Measure the surface to cover. Cut the film into right size, leaving 5mm extra overlap on all edges is better.
根据你所要贴的物体表面的尺寸裁剪相应尺寸大小的产品。留5cm左右的边距为佳。
3-Peel off the backing paper evenly with one hand whilst smoothing the film to the surface. with your other hand, from the center to edges. For this it's better to use a soft cloth.
将膜与底纸撕离，一只手拉着膜向前，另一只手将膜表面由中间向两边贴平。使用软布更易摸平。
4- Creases and air bubbles can be removed by applying light pressure from the center to the edges. Pierce stubborn bubbles with a needle and squeeze the air out.
轻轻由中间向两边积压气泡和褶皱。大的气泡，可以用针刺破，挤出空气。