Introduction:
Replace RF garage door remotes or other electrical controllers with this code learning programmable universal remote control. Learn how to program for garage door remotes or other remotely controlled needs. A full remote controller replacement is often the better option than to repair faulty ones. Dual mode 1 channel radio frequency remote control system.

Feature:
1.Works in a multitude of different systems
2.Auto code learning
3.Low power
4.LED indicator light
5.Stable performance
6.Easy to install and easy to use
7. Fit for: Electric gates, Electric windows, Garage doors, Lifting equipment, Robotics, Security systems, Vehicle central locking, Vehicle sun roofs
8.Coding: 16 different cords, if you have more, it will delete the cord at the begining that you set.

Receiver Specifications:
Channels: 1
Working voltage: 12V DC
Dual mode: momentary/toggle
Power consumption: <10mA
Output Current: <10A
Sensitivity: ≥-95dBm
Frequency: 315/433MHz
Dimensions: 65 x 38 x 22mm (2.5 x 1.5 x 0.9”)

Remote Control Specifications:
Voltage: DC 6V
Frequency: 315/433MHz
Range: 50-100 meters (Open Space)
Current: < 15mA
Shock Resistance: 4.7
Size: 62x34x10mm
Bottom: ON/ OFF

Learning Method:
1.After power on, the indicator light is always on. Then, you press the learning cord 2 or 3 seconds, and the indicator light power off.
2.Release the learining cord, and press the any key of remote control.
3. After the indicator light have 5 times flash, it shows that you are successed in learning.

Remove Method:
Press the learning cords about 8 seconds, and the indicator light return being power on that shows the learning cord remove.

Package Included:
1x Receiver
1x Remote Control