Step 1: Clean all parts of the cup before use.?/p>

All parts are top rack dishwasher safe or can be hand washed. Fully disassemble parts before washing (remove the valve soft spout or both straw parts and unplug the straw valve). For Spout and Spoutless cups store the valve under the lid when washing in the dishwasher. Do not use abrasive cleaners.

Step 2: Assemble the cup.

Soft Spout: Pull soft spout through the lid and press vent firmly into place.

Spout and Spoutless: Pinch both valve cylinders to open slits. Insert valve cylinders firmly all the way into lid.

Straw: Insert soft straw into bottom of lid and pull through from the top. Press vent cylinder firmly into small hole in lid aligning tab to slot. Fold and insert valve cylinder into the bottom of soft straw. Insert hard straw.

Step 3: Closing the lid.?/p>

Screw lid onto cup twisting clockwise until tight.

Tips for optimal performance:

All parts are top rack dishwasher safe or cab be hand washed.

Do not use abrasive cleansers.

After washing allow cup parts to dry thoroughly between uses.

Do not use cups with carbonated beverages or pulpy juices.

Do not use cups in the microwave.

Do not leave child unattended while using the cup. To avoid possible injury do not let child walk or run with the cup. Do not allow child to bite or chew the spout or straw. If the spout or straw is damaged or shows signs of wear please discard. Do not use with hot liquids as this may result in burning.