Studio : Fair RC

Publisher : Fair RC

Binding : Toy

Product Description
Powered by twin 80mm EDFs, this 1700mm wingspan beast is larger than the two 1500mm wingspan twin 70mm EDF A-10s on the market, while still remaining easy to transport. The 80mm A-10 delivers the best balance between size, weight, thrust, top speed, stall speed, transportability, rough grass handling, and overall scale fidelity.

We tested the 80mm A-10 to takeoff from extreme grass 3" tall. The main landing gear mounts are arranged as part of the aforementioned plywood, carbon, and aluminum matrix, to distribute rough landing forces throughout the wing and avoid critical damage.

In the air, the A-10's all-new power system delivers a fully scale flight profile. Tall vertical loops, hard "jinking" turns, stable slow flight, and authoritative power. Critically, this model was designed to fly at all throttle points, both upright and inverted, without pitch sensitivity. There isn't any nose weight in this A-10; instead various factors were optimized in concert so you won't need lots of up elevator to fly level, and varying power suddenly won't cause the nose to pitch up or down..

Spec:
Wingspan:1700mm / 66.92in
Overall Length: 1551mm / 61.06in
Motor Size:2x 3530-1900KV Brushless Outrunner
ESC: 2x 100A ESC with EC5 Connector
Servo:9g metal digital x1, 17g metal digital x9, 30g metal digital x2
Radio: 6 Channel(Not Included)
Ducted Fan Size: 2x80mm Metal EDF with 12 Blade Fan
Recommended Battery:2x6S 22.2V 4000mAh- 6000mAh LiPo(Not Included)
Aileron: Yes
Elevator: Yes
Rudder: Yes
Flaps: Yes
Retracts: Yes
Minimum Age: 14
Experience Level :Advanced
Assembly Time: 1 hour
Material: EPO Foam
Package Options: PNP(everything included except radio, receiver, battery and charger)
0