2x High Quality H11 30W Cree LED For HID High/Low Beam Headlight Light Bulbs Kit IP68 White 6000K 3600LM IP68

Specifications:
Socket Type: H11
Application: Headlight Headlamp High or Low Beam Bulb
Power: 60W (30W / Light)
Lighting Color: Pure White
Color Temperature: 6000K
Light Source: Latest Technology Chips
LED Type: 2 Cree High Power LED Chip / Light
Operating Voltage: DC12V-24V
Waterproof Rate: IP68
Optional Color: Silver
Beam Angel: 360 Degrees
Housing Material: Top Quality 6063 Aviation Aluminum
Lumen: 7200LM (3600LM / Light)
Life Span: about 30000 hours
Operating Temperature: -40℃～+80℃

Features:
Detachable light base metal plate， easy to install
High Quality 2nd Generation Newest Intelligent LED Chips
High current drive， an increase of 25% percent lighting
Increasing heat diffusion area， optimal heat dissipation
Clear luxurious， passing blind spots
Car-free professional-grade Crystal cores
No need warm up/ballasts/relay
6063 top quality aviation aluminum alloy accelerate the heat dissipation to better heat dissipation
Super Quality Not need Ballasts， Relay and Cooling fan
High heat dissipation performance product

Use a combination of three kinds of metals:
I. Copper (heat conduction rate second only to silver)
II. Silver (speed up conduction velocity)
III. T6063 aerospace grade aluminum radiators to form a meshed structure， best heat conduction.
Radiator heat sink aluminum total area about the size of an A4 sheet of paper.
More advanced use of professional automotive (heat resistant up to 150 °C)
the best subject of your car headlights， enjoy luxury car level LED headlamps of superiority.

Automotive LED headlamps advantages:
LED lights more power than traditional halogen energy
Xenon lamp brightness and proximity， but the LED lights light up without delay
LED power driver with 12V-24V voltage constant current mode
LED car headlights simple structure， fewer parts than xenon lamps
significantly lower than the xenon lamp failure rates
Automotive LED headlamps color temperature balancing
In the same color to clear of the Xenon bulbs about 6000K

Installation:
1. Make sure that the car has had time to cool down properly before starting the installation process.
2. Make sure to have the ignition turned off and the car keys removed.
3. Put the vehicle into (P) park or make sure it is securely in gear.
4. Be careful to avoid cutting or crushing the bulbs.
5. Do not touch the bulbs with your fingers， as this will cause blotting.
6. Fully inspect all the connection of the contact points， sockets and the wires as faulty connections can cause lighting problems.
7. Make sure that the end of the bulb does not come in contact with the interior light shield or any part of the headlight when adjusting the bulb.

Package includes:
2 X H11 6000K Pure White LED Headlight Bulbs