Easy to apply by brush, roller or sprayer. Use above or below the waterline
Performance equal to solvent-borne counterparts
Thins and cleans up with water. Low VOC formula requires no special handling or storage
Long 6 hour pot life
No sanding required before topcoat or bottom paint application. Easily sands for smoother topcoat appearance

Technical Details

Product Details

Package Dimensions
Width : 8.58 inch
Height : 8.5 inch
Length : 13.31 inch

Shipping Weight: 12.75 pounds (View shipping rates and policies)

ASIN : B013K2VPXK

Product Description

SilverTip Yacht Primer is a waterborne, two-part epoxy coating specifically formulated as a tough, below-the-waterline primer for marine topcoats. Though SilverTip Yacht Primer was specifically designed for use with System Three WR-LPU, it is compatible with most commonly available marine topcoats. It applies easily over fiberglass and carbon laminates, polyester or epoxy resin surfaces, and properly prepared wood, metal, and cementitious surfaces. In addition, it provides a smooth base for top coating over epoxy or vinyl ester barrier coats. Yacht Primer offers performance equal to its solvent-borne counterparts, in corrosion protection, film-build, and sand ability. In addition, it is non-flammable and contains no highly-hazardous (HAPS) solvents or heavy metals.
SilverTip Yacht Primer can be applied by brush, roller, or spray. For spray application, HVLP equipment is recommended. Yacht Primer offers corrosion protection over aluminum or steel, but contains no heavy metals. When cured, it sands easily to a hard, smooth surface, to help give a high-performance topcoat, like WR-LPU, the best appearance.