There are different types of car lamps with different light color available for you:

The Kelvin Scale:

• Higher color temperatures (5000K or more) are "cold", color is green to blue.
• Moderate temperature (3000-5000K) are "cool", color is white.
• Lower color temperatures (2700-3000K) are "warm", color is yellow to red.

• 1. First, open your car hood and turn off the power
• 2. Check whether the model of headlights correspond with your car
• 3. Remove the original vehicle lamps and circuit wiring
• 4. Drill a hole (About 25 mm diameter) in the middle of the rear cover of the headlamp with a hole saw used for the leading-in of Xenon lamp wire
• 5. Take apart the safety tube of xenon lamp
• 6. Put the xenon bulb into the headlamp unit and lead out high voltage wires from the hole, and cover the hole with rubber ring in order to prevent water and dust into the headlamps
• 7. Fixed the ballast in the right place with screws or mounting bracket, and the best installation location is away from the car engine, such as the side or below of Headlamps and bumper
• 8. Connect the high-voltage line of ballast with the xenon bulb
• 9. Connected to 12V power wire and control line, the red one is positive and the black is negative

• 1. Brighter
  HID Xenon Lamp is three times the light output of traditional halogen lamp, two times the irradiation distance
• 2. Safer
  HID Xenon Lamp provides broader and clearer visual field, removes the dangers of driving in darkness
• 3. Longer Life Time
  The life time of HID lamp reaches more than 3000h, 8 times of traditional halogen lamp
• 4. Lower Power Consumption
  HID lights will be environment friendly. Power of normal HID lamp is only 30W or 35W. You will get "cool" lights instead of "hot" lights

• 1. In order to secure installation, please wait for cars and engine cool completely
• 2. Please make sure the gear is in neutral before installation
• 3. Please make sure the switch is closed when installing
• 4. Be careful not to get burnt when switch the car lamp
• 5. Be careful not to beat and scratch the bulb
• 6. Don＞t touch the bulb with your fingers, because it will leave stain on bulb
• 7. Please check connector, Interface port and the wire connection, because the wrong connections will cause lighting problems
• 8. Please don＞t let the bulb terminal access to the internal lens hood of headlight assembly
• 9. Please drill a hole (25 mm) in the resin or rubber back cover of the headlamp
• 10. Please make sure the polarity is correct for the connection between bulb and High-voltage starter
• 11. Please make sure the polarity is correct for the connection between ballast and power source

FEATURES

• Specially-designed xenon lamps adopt high-tech material
• It features low power consumption and long service life
• Waterproof and dustproof HID meets the high standards of product quality
• Compact modular design for easy installation: only insert HID bulb into the original lamb hole, stick to the ballast and connect it to the power supply
• The combination of more light output and wide beam will potentially enhance your safety during driving
• HID lamps with good color temperature will improve the performance of a car
• Xenon lamps are characterized by enhanced durability and shock resistance
• This xenon lamps with 35W power will bring you the unprecedented comfort and safe driving at night
• It is not lightened by the high-voltage electrical stimulation instead of tungsten filament, which would prolong the lifespan of the lamp

Specifications

Package Includes

• 2 x D4C 6000K 35W HID Xenon Car Light Bulbs (Pair)