7. Bluetooth connection

- Laser Bluetooth HID keyboard support

- As long as the master device has HID compatible Bluetooth HID connection without having to install additional drivers

- Requires Bluetooth 2.1 and above

 

Note

 

Laser keyboard will automatically return even recently connected devices, these devices if you enter the search state Rom wait for the new device.

 

 

Bluetooth HID compatible devices

• iOS4 and above

• Android 2.0 and above

• Windows XP and above

• Windows Phone 7 and above

• Mac OS (only using the keyboard)

• Blackberry 10

• PS3

 

Bluetooth connection Description

1. Boot

2. The left blue LED light flashes to indicate that laser keyboard is searching for a new device or a device prior to a match too. Laser keyboard will automatically connect recently connected devices.

If a single master device, this feature is very convenient.

If the laser keyboard has reconnected recently connected device, for matching a new device, you must first connect the device to turn off Bluetooth, laser keyboard to the left of the blue LED will blink again

3. On the master device, enter the Bluetooth connection settings at the search for Bluetooth devices

4. When the device found "Laser projection keyboard", click on the link.

5. Once a successful match, LED light stops blinking and turns off.

 

 

 

 iOS and Android pairing successful interface:

 

iOS interface

 Android界面

Special definition 8.SHIFT keys
We usually hold down the SHIFT key on your keyboard general. In order to improve convenience and precision type laser keyboard, this product has a special usage. We just need to press the SHIFT key once the key functionality is now preserved at the same time, the right of the LED lights turn blue, SHIFT key lock. Pressing the SHIFT key SHIFT function again, while the right side of the blue LED light goes out
 
Note
If the right LED light has been blue, indicating that the SHIFT key is locked
 
9. The power-saving mode guide
• If no operation for 30 seconds on the keyboard, the keyboard pattern dimming the display is turned off.
 Press any key to return to the standard brightness. Power, the factory default brightness of the brightest
• If the keyboard five minutes without operating the automatic standby restart by pressing the power switch

10. The parameter adjustment
> Sound Adjustment
· Total 5 volume. When the device switches, keeping the volume adjusted
• Increase volume: Press FN key while you click the right arrow
• Lower the volume: Hold down the FN key while clicking the left arrow
 
> Keyboard brightness adjustment
* Total 4 brightness. When the device switches, to maintain the brightness adjusted
· Increase the brightness: Hold down the FN key while you click the up arrow.
• Reduce brightness: Hold down FN key while you click the down arrow
 
11. Mouse mode
Switching from the keyboard mode to mouse mode, click the button on the keyboard, the keyboard brightness pattern will darken, no other keys while clicking sound, which indicates that the mouse has entered the mode.
Switch from mouse mode to the keyboard mode, click the button on the keyboard, the brightness of the keyboard will light pattern, while clicking on the other buttons are the normal input, which means that the keyboard mode has been entered.
+ Only support mouse / cursor features can use the mouse (mostly Windows, Android and Mac OS devices support this feature).
 
Note: iOS devices do not support mouse functions.
 
Note
 
If the brightness of the keyboard pattern darken, click the button and nothing happens, make sure whether to enter into the mouse mode. Click to switch to keyboard mode.
 
Mouse Mode
 
Only support mouse / cursor features can use the mouse
 
Each boot projection keyboard to enter keyboard mode

12. 特性参数

键盘投射

传感器

电气特性

环境条件

外观和重量