Effective and Safe---Efficient and safe to pop out dents,repair door ding and hail damages on the metal surface,such as auto,motorcycle,refrigerator,washing machine etc.No damage at the original paint.
Easy to control,in any where everyone can removal the dent by yourself with dent removal tools;Every tool is meticulously inspected and certified for Rockwell Hardness . Save money and no damage to your car body.
HOW TO USE IT- First,simply glue a dent pulling tab to the center of the dent,Then,Place pulling bridge over dent pulling tab,Twist turning knob until it pops the dent out! Yellow Glue Sticks has a strong viscosity,suitable for the relatively harder parts on cars;The dent repair kit is easy to operate.Even the girl can easily repair
Widey Use-Tools are made from several types of Stainless steel. Tempered high carbon Stainless steels and standard stainless steel are used depending on the design of a particular tool .These PDR Tool also suitable for the sheet metal processing of automobile,refrigerator,Motorcycle Body and washing machine.
Professional paintless dent removal tools for auto dent and hail damage, Unique arched bridge design eliminates the chance for additional damage.

Technical Details

Product Details

Package Dimensions
Width : 9.41 inch
Height : 6.5 inch
Length : 15.59 inch

Shipping Weight: 6.57 pounds (View shipping rates and policies)

ASIN : B071CNVXPG

Product Description

DIY Easy to operation & SAVE MONEY-No damage at the original paint.
How to use this paintless dent repair kits?

1.Clean the dent with a clean wet cloth;
2.Mount the glue stick into the glue gun,pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes;
3.Use a proper drawing gasket. Large dent requires a large drawing gasket. (Note: The larger the drawing gasket is, the larger the drawing force is);
4. Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue);
5. Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres (Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter);
6. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent;
7. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen;
8. Clean the repaired place with a clean wet cloth.

Packing list:
1x dent lifter
1x 100w glue gun
1x tool box
1x bridge puller
1x LED white line board
1x rubber hammer
5x heads metal tap down
1x red dent puller
1x alcohol bottle
1x shovel
1x cleaning cloth
12x black tabs
5x blue tabs
10x black glue sticks
10x yellow glue stick
10x white glue sticks
1x square pump wedge
1x introduction guide