2 in 1
iRoom Cycle Wireless Vacuum Cleaner PLUS
Stick and Handy
Specification
Model Name AST-009
Dimension L 20cm x W 18cm
Battery 22.2V / 2200mA
Operating time 40min(Low) / 25 min(High)
Charging time 4 hours
Rated Voltage 120W
Charger Adapter 26V / 500mA
Suction Power 4000Pa(Low) / 7000Pa(High)
Weight 1.89kg
Length (Extension pipe + Brush) 1m
KC certified MSIP-REI-Abc-AST-009
Adapter KC certified HU10437-15004A
Hassle Free
Lower noise, Stronger suction
Experience the suction power and motor that remove fine particles easily for its cyclone method.
Wireless Vacuum Cleaner Maximum 40 min operation
Lower Noise level (75dB)
No fine particles (installed HEPA filter)
Dual Brush
Strong Motor (120W)
Powerful suction (Cyclone)
Lightweight(1.9kg)
Supreme auto dual brush removes extra fine particles completely.
Dual Carbon fiber Brush creates no static electricity
Dust gathering with Cyclone. Forceful 120W Motor for its powerful 25W suction
Ergonomic Design for arms and wrists.
As the motor located in the handle to reduce force on arm and wrist.
Battery indicator
1 - 25%
2 - 50%
3 - 95~100%
One-Touch Button
No need to press the button for long as you can adjust suction power from low to high via one-touch button.
Wall Mount Charging stand
You can mount the stand on the wall, or just keep it on the floor to store the device,.
One-Touch Dust bin
Press the button to empty the dust bin. Dust bin is detachable for easy cleaning.
Long lasting LI-ion rechargeable battery
Battery fully charged for 4hours lasts for 40 minutes in continuous operation.
Washable HEPA filter
Washable HEPA filter traps even invisible micro particles.
Replaceable Brush kits
Accessory brushes for tight crevice, tiny dust, and kitchen refuse
Wall mount/floor charging stand / Brush kits
Battery, HEPA filter, and adapter are consumables.
Vacuum cleaner maintenance
1. Brush cleaning
Hair tangling may cause damage on the cleaner. Remove the tangled hair before use.
How to clean brush
1. Flip the brush, and find arrow at the right edge.
2. Press the parts the arrow is printed to the right side to remove brush
3. Take the brush out to the front
4. Remove tangled hair between brush and bearing, and reassemble the brush.
2. Filter Cleaning
Dust may get stuck around filter too. If the holes on the filter get blocked, vacuum cleaner may not operate.
How to remove filter
1. Hold the motor and twist it toward the arrow directing to separate motor and dust bin
3. Reassemble the filter and motor bin accurately.
If the filter and motor are not replaced accurately, the device will not operate.
How to assemble
1. Fit the rabbets on the filter and motor correctly.