Yellow Glue Sticks has a strong viscosity,suitable for the relatively harder parts on cars; White glue sticks is a very ordinary in stickness sticks,suitable for not very hard parts on cars; Black Glue Sticks is Suitable for Relatively Soft on Car
Baking-varnish-free dent repair,Powerful enough to pull out dents in auto bodies,and for the washing machine''s metal plate,any door flat dent;Widey Use,These PDR Tool also suitable for the sheet metal processing of automobile, refrigerator, Motorcycle Body and washing machine
Easy to control,in any where ebayone can removal the dent by yourself with dent removal tools;Every tool is meticulously inspected and certified for Rockwell Hardness
Tools are made from several types of Stainless steel. Tempered high carbon Stainless steels and standard stainless steel are used depending on the design of a particular tool
USB Dent board is used to check where is the denton the car ;Package as the No.1 picture shows,if there is missing parts or have any problems,please feel free to contact us.
With the air wedge, you can adjust the level of furniture
Kitchen cabinets and household appliances
It holds many different types of elements during fastening
Don''t inflate excessively when operate.after being proped up,let the air out,then put the triangle block
Package include:1pcs U shape air wedge,1pcs square air wedge,1pcs samll rectangle air wedge,1pc big rectangle air wedge

Technical Details

Product Details

Package Dimensions
Width : 8.6 inch
Height : 1.9 inch
Length : 11.1 inch

Shipping Weight: 9.02 pounds (View shipping rates and policies)

ASIN : B019Z7QOBW

Product Description

How to use these paintless dent repair tools: 1.If the dent so small and can''t see where is it,use a dent board to check where is the dent.
2.Clean the car dent with a clean cloth before repair.
3.Put the glue stick into the glue gun, connect the power source and preheat for 5 minutes.
4.According to the Dent size to choose the Glue Puller, more bigger dent size,more bigger the glue puller and will larger force.
5.Pull the Glue Gun trigger and apply the glue puller with extruded glue,the glue puller should full of the glue.
6.Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres.
7.Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter.
8.After the glue cooling,use a dent lifter or T-bar to align and press the puller to pull up the dent.
9. If dent still exists, check with a Line board again, knock it slightly with a flattening hammer or pen.
10.After finishing the dent,use the alcohol to clean the glue which on the car and the puller sets.

Package list￡º 1x LED dent board
1x Tool bag
1x black dent lifter
1x 100W glue gun
1x Pops a dent
1x rubber hammer
1x silver tap down
1x Silde hammer
1x mini T-bar
1x metal tap down with 9 heads
1x Plastic shovel
5x blue puller tabs
9x black puller tabs
4x yellow puller tabs
6x yellow glue sticks
6x black glue sticks
6x white glue sticks
1x manual