Item Descriptions:

1.

Material: TPU

It adopts TPU which is hard to break even if it is soft, it can be easily wiped off even if it is dirty, hard to sunburn and hard to yellow, so it can be used for a long time.

2.

Precision cut according to the shape of the main body, design pursuing practicality, even when mounting the case, camera, power button, volume button, earphone jack, connector etc can be used.

3.

We adopted a technology (air cushion technology) for efficiently absorbing the impact at the time of fall at the inner corner of the case.

Impact transmitted when the body falls is absorbed by the four corners (air cushion) inside the case, so minimize the impact.

4.

The front of the case has a high border, and when falling it reduces the impact of the front side as much as possible, even if you put the iPhone on the desk facing downwards, the screen is not damaged and you are prepared for the shock from all directions.

Five.

There are bulges that are raised higher than the back in the four corners of the case, and only the bulges in the four corners are in direct contact even if they are placed on a hard flat surface such as a desk, Avoid back wear, fine scratches by normal use as much as possible.

6.

In order to firmly protect the camera of the new iPhone, it is considered to be 0.2 mm thicker than the protrusion of the camera part.

7. There is a small irregularity in the geometric design which can be seen a little on the back, effectively releasing the heat generated when using the iPhone.

It also has the effect of preventing fingerprints and dirt.

Note: For inquiries please click the exhibitor 'salmoph' on the product page, move it to the store homepage, click 'contact the seller' at the bottom right and contact us so please contact us.

Features:

• Please enter model number Confirm this is compatible:
• * Applicable model: iphone 6 / iphone 6s Please note that the case model is not mistaken.
• (Jenuos JP Direct is the only regular shop at the head office, please be careful of the selling agency.)
• <High transparency * Customization of liking> The TPU cover with high transparency performs as beautifully as adding flowers peculiar to the iPhone 6s / iPhone 6, you can paste the favorite sticker on the back and customize your preference.
• <Reduce shocks> When dropping iPhone 6 / 6s, it is likely to be broken by "Kado", the first to hit the ground.
• JENUOS uses air cushion technology for the four "Kado" to protect the shock-vulnerable "Kado", you can enjoy more scientific effects.
• <Overall Protection> Since it is designed 1 mm higher than the screen, it is designed higher than the camera so that the back camera does not touch the ground when placing iPhone 6 / 6s, protect important camera lens from scratches,
• Even if you place and operate the screen, there is no rattling.
• Using a bumper increases the difference in level with the ground, making it less prone to scratches.
• You can keep the back of the case clean.
• <Full coverage around the button · terminal!
• > While maintaining a slim design, it improves the responsiveness of button operation and realizes smooth use.
• Small buttons are hard to find and difficult to push, but the buttons are covered by the case, making it easy to operate.

Product information:

Shipping Weight: 31 g

Package Dimensions: 1.19 x 11.91 x 20.50 cm