features:<br />condition: 100% !<br />length: 1m / 3.28ft<br />width: 2.0mm / 0.1&amp;amp;quot;<br />weight: 8g / 0.3oz<br /><br />how to use:<br />1.place the desoldering wick over the solder to be removed，then push the heated soldering iron tip onto the desoldering wick.the solder will be absorbed.<br />2.remove the desoldering wick after the solder has been absorbed.<br />3.cut off the used section of the wick using nippers.<br />4.repeat steps 1，2 and 3 if the solder is not removed completely.<br />absorbability may differ depending on the type of solder.sn63% and 60% (tin content) have good absortbability.<br /><br />package contents:<br />1 x desoldering braid solder remover cp-2015 wick