Item Descriptions:

color:

white

Nikatto LED human sensory light

Place the PC plastic sheet

In case

1.

While lightly pressing the lid on the back of the main unit turn it to the left and remove it.

2.

Fit the lid onto the PC plastic sheet.

3.

Rotate the lid and rotate it clockwise to lock it.

Paste the light on the wall

1.

Please wipe off the oil on the wall, moisture, dust, etc. before pasting, please dry thoroughly.

2.

Please peel off the backing of double-sided tape and paste it in the middle of the lid.

※ Because the light is pasted with a powerful double-sided tape, once pasting it becomes difficult to paste again.

Please carefully decide the pasting position.

3.

Please peel off another mount and paste it on the wall.

※ When replacing the batteries please rotate the light counterclockwise before taking out the light.

Human Sensor

It is an LED sensor light with built-in human sensor that lights up in response to movement as people approach.

It automatically turns off in the daytime, when it gets dark at night / dark, it automatically lights up when it detects a person's movement and turns off after about 20 seconds.

The human sensor distance is 3 m and the angle is 120 °.

Application location

Because it is a battery type, you can use it easily in places without outlet.

It can be installed in three ways: placing directly on the floor, etc. · wall hanging · pasting with double-sided tape.

It is recommended for interior lighting in the crime prevention such as parking lot and entrance front, corridor and stairs, basement, garage, kitchen, bedroom, children's room, toilet, closet and warehouse, simple lighting.

■ Product Specifications:

Name: LED sensor light

Dimensions: 8 * 8 * 2.5 cm

Weight: Approx 42 g (battery separately)

Material: ABS

Light source: 5 LED *

Effective sensor distance: approx. 3 m

Sensor effective angle: about 120 °

Lighting holding time: About 20 seconds (continued lighting during detection)

Applicable batteries: AAA batteries / rechargeable batteries * 3 (batteries not included)

Power consumption: 0.5 W

Installation location: Available only in the room

Package contents:

● 3 * LED sensor light

● 3 * PC plastic sheet

● 3 * 3M double-sided tape

● 1 * Owner's Manual

● 1 * Warranty card

※please note:

① We strive to satisfy our customers 100%.

In the unlikely event that there is something wrong with the product,

"Account service" → "Order history" → "Sales: Nikatto" → "Ask questions"

Please contact us as soon as possible.

Please contact the seller contact.

We will respond promptly within 24 hours.

② Following the Amazon policy, after-sales service such as returned goods and exchanges will be made directly to the Amazon, so we can respond promptly so do not worry about purchasing.

Features:

• ★ [Personality sensor function]: It is a human body sensor LED light that lights up by sensing the movement of the human body.
• The sensing range is 3 meters, and you can be sensitive when humans fall within 3 meters.
• ★ 【Photometric sensor function】: With light intensity sensor, when it is bright, it is energy saving design that light does not stick even if it enters human sensor range.
• When you sense movement of the human body in a dark place, the light will light up.
• When you move away from the sensing range, the light will automatically disappear after about 20 seconds.
• ★ 【PC plastic sheet included】: Since it is battery type, it can be easily installed on tape and PC plastic sheet without wiring.
• Hang it on a hook, paste on a wall, put it on a table, how to use it depends on various ideas.
• ★ 【Cordless】: No troublesome wiring required, so you can install it in your favorite room such as toilet, washroom, hallway, entrance, cabinet, stairway, cupboard, closet, kitchen etc
• ★ [Soft light]: Although it is not very bright, it is soft light, so it is not dazzling even if you look directly.

Product information:

Shipping Weight: 199 g

Package Dimensions: 3.56 x 9.40 x 25.40 cm