It is for one dog， if you need to set up for two dogs， please contact me to buy one more receiver.

Feature

1. Rechargeable and waterproof collar

2. 100 levels of vibration.

3. 100 levels of static.

4. The level can be altered by use of up & down button.

5. This system is used for only 1 or 2 receivers.

6. The receiver will TURN OFF if it is unused for 3 minutes.

7. Any movement will activate the receiver into STANDBY MODE.

Note:

a.Our Pet Training Collar is not suitable for dogs under 4 KG.

b.Waterproof Collar but you cant immerse it into water and use in the storm

Power saving

1. The collar receiver will TURN OFF if it is unused for 3 minutes.
2. Any movement will activate the collar receiver into STANDBY mode.
3. The transmitter will go into STANDBY mode if there is no operation after 20 seconds and turn off after 2 minutes.

Prepare the Remote Transmitter

Charge the Remote Transmitter:

1. Connect the charger connector to the charging jack.

2 Plug the charger into a standard outlet.

3. The red light on the Transmitter will be lighted.

4. Charge the Transmitter at least 6 hours for the first charger.

5. After fully charged， the red light will be turned off automatically.

How to use the Transmitter:

1. To turn on/off the Transmitter， press MODE button for 5 seconds.

2. By pressing the MODE button to change to different modes (the LCD images will change).

3. Press the up and down buttons on right hand side to set level.

4. The Transmitter will go into STANDBY MODE if not operated for 20 seconds and will TURN OFF if not operated for 2 minutes.

5. In STANDBY MODE， press any button (except LED light button) to wake it up.

Low battery indicator: Low battery symbol will show up on the right down side of LCD screen.

Prepare the Collar Receiver

Charge the Collar Receiver:

1. Connect the charger connector to the charging jack.

2. Plug the charger into a standard outlet.

3. The red LED light inside the collar receiver will turn on.

4. Charge the collar receiver at least 6 hours for first charge.

5. After fully charged， the red LED light will be turned off automatically.

6. When charging is completed， put the rubber cover in the right position to keep the internal unit from dust and water.

Low battery indicator: The collar receiver will keep beeping for 2 minutes unless it gets charged.

Connect the Transmitter with the Collar Receiver (Encode)

1. Turn on the transmitter and choose channel 1 or channel 2 to encode.

2. Lift the reset part of the rubber cover in the collar receiver.

3. Use a toothpick or paper click to insert into the reset hole inside the collar receiver.

4. Press the LAUNCH button on the transmitter immediately while you are hearing a beep from the collar.

5. The collar receiver will beep; it means that the transmitter has encoded the collar.

6. After completion， put the rubber cover in the right position to keep the internal unit from dust and water.

How to check the static is working

1. Use the test light LED-provided.
2. Attach the light to the metal probes-select STATIC mode-you can see static symbol on the screen-press the LAUNCH button-the LED will flash on.3. Select a low number on the LCD-display-put your fingers on the metal probes and press the LAUNCH button.

Notes for use