This process calibrator with high accuracy and stable performance is not only a signal source to calibrate voltage and current, but also a multimeter. With data hold, relative value measurement and backlight, much convenient to use.

Features:
This process calibrator is not only a signal source to calibrate voltage and current, but also a multimeter.
The calibrator can be used for 0-24mA/4-20mA current loop and 0-10V/0-100mV DC voltage measurement or output.
With multimeter function, the calibrator can be used to measure AC/DC voltage, AC/DC current, logic frequency, duty ratio, resistance, capacitance, liner frequency and test diode, continuity.
Adopts 4 layers of gold-plated circuit board, signals of input and output designed separately, to ensure that the stability of small signal.
A USB interface makes it possible to transmit data to computer, but it only works when using multimeter function.
With data hold, relative value measurement and backlight, much convenient to use.
High quality test probes will not be damaged easily.
The fuses are easy to replaced.
Powered by 6 batteries(not included).

Specifications:
Calibration Function:
DC Voltage Input Range: 0-100mV/0-10V
Resolution: 0.01mV/0.001V
DC Voltage Output Range: 0-100mV/0-10V
Resolution: 0.01mV/0.001V
DC Current Input Range: 0-24mA
Resolution: 0.001mA
DC Current Output Range: 0-24mA
Resolution: 0.001mA
Current Percent Display: 0%=4mA, 100%=20mA
Multimeter Function:
Voltage Measurement Range: 400mV/4V/40V/400V/600V(AC/DC)
Resolution: 0.1mV/0.001V/0.01V/0.1V/1V
Current Measurement Range: 400μA/4000μA/40mA/400mA/10A(AC/DC)
Resolution: 0.1μA/1μA/10μA/100μA/10mA
Resistance Measurement Range: 400Ω/4kΩ/40kΩ/400kΩ/4MΩ/10MΩ
Resolution: 0.1Ω/0.001kΩ/0.01kΩ/0.1kΩ/0.001MΩ/0.1MΩ
Capacitance Measurement Range: 40nF/400nF/4μF/40μF/100μF
Resolution: 0.01nF/0.1nF/0.01μF/0.01μF/0.1μF
Continuity Measurement Range: 400Ω
Logic Frequency: 5Hz/50Hz/500Hz/5kHz/50kHz/500kHz/4MHz
Duty Ratio Measurement Range: 10-95%
Operating Temperature:
0-30°C(relative humidity 0-80%)
31-51°C(relative humidity 0-50%)
Power Supply: 6 * 1.5V AAA Batteries (not included)
Item Size: 20.5 * 10 * 4cm / 8.1 * 3.9 * 1.6in
Item Weight: 556g / 19.6oz
Package Size: 23 * 13.5 * 8cm / 9.1 * 5.3 * 3.1in
Package Weight: 887g / 31.3oz

Package List:
1 * Process Calibrator(battery not included)
1 * Pair of Test Probes
1 * Pair of Test Clip
1 * USB Cable
1 * USB Disk
2 * Fuses