specification:
<br />product name: solar motion sensor light
<br />model: 3837
<br />solar board: amorpho silicon solar panels 5v / 0.3 ~ 0.4w
<br />battery: 1x 3.2v / 400mah phosphoric acid iron battery include
<br />light source: 7x white led / unit induction lights after 15 seconds
<br />induction distance: 3-7m
<br />charging time: 6-8h
<br />waterproofing grade: ip44
<br />main material: plastic
<br />color: black
<br />switch: on / off
<br />whole body size: 21.5 x 19 x 10cm
<br />
<br />package include:
<br />1x solar motion light:
<br />1x rotate holder
<br />1x manual
<br />
<br />caution:
<br />1.safe for outdoor operation;
<br />2.e the same type, new 14500 li epo4 3.2a 400mah rechargeable battery rechargeable battery only;
<br />3.do not mix different battery types, or new and ed batteries;
<br />4.the battery mt be inserted following the indicated polarities. ensure that the  and - terminal are placed in the correct orientation;
<br />5.keep batteries out of the reach of children;
<br />
<br />battery replacement:
<br />note: this operation should be done in the morning on a sunny . this will allow the lantern to receive a full 8 hours of sunlight so that the rechargeable battery can reach maximum capacity.
<br />1.move the power switch on the main body to the off position;
<br />2.remove the four screws on the battery compartment cover on the back of the main unit;
<br />3.carefully remove the old batterythe compartment by hand and replace with a new 14500 li fepo4 3.2v 400mah rechargeable battery. ensure that the  and - terminal are placed in the correct orientation;
<br />4.replace the battery compartment cover and re-install the four screws;
<br />5.once assembled, mount your solar light to its original surface location;
<br />6.move the power switch on the main body to the on position.