new style
The program has been updated to version 14-06-06
* Boot tone
* After the temperature setting is completed tone
* Manual / Auto Sleep
* Sleep forget power off tone (half hour)
* Wake valid indication display (the last decimal).
* First wake-up tone (no beep after you wake up)
Start sharing program
Operating voltage: (AC-DC dual-support)
DC: 16V-24V
AC: 12V-26V
Temperature setting range， 180 --435 degrees
Automatic sleep / hibernate * Manual Auto Sleep when you still do not have the machine 20 minutes， automatically converted into energy-saving sleep mode， stop heating. * Manual sleep but when you press the knob， the manual into a power-saving sleep state， stop heating， LED dimmed light.
Auto wake / manually wake / ball switch * automatic wake wake a ball switch， to achieve high sensitivity wake (sleep) function， as long as you gently pick up the soldering iron， heated reactions have automatic wake up， but also voice prompts， very Convenience. * Manual wake light knob is pressed， the manual also can wake heated. LED variable light
Sleep switch with indicator (Sleep @ LED dimmed light， digital tube closed， the heating suspend， hibernate forget power off tone)
Temperature setting， the rotary knob clockwise to increase the temperature value. When the knob is rotated counterclockwise to reduce the temperature. After setting the buzzer and tone. And automatically saved for the next boot with.
PCB board size 42MM * 67MM.
Machine compact size， easy to carry high 40MM width 88MM length 138MM
Support for the core can handle， remove the protective tube steel sleeve. Straight out heater， (note !! T12 heater are not spin and twist. Because there are two electrodes， spin and twist are easily damaged， should be directly inserted Pa)
Note:......
Default configuration 12MM flight verbal，
Support T12， T2 heater