The APM2 2.5 2.6 2.8 Flight Controller Exclusive Ultrasonic Module features a plug-and-play design so there´s no need to modify APM software. It can replace XL-EZ0 to support sonars, build a cable to reduce sonar noise, connect sonar sensor on APM 2.x or PX4, mount sonar sensor, enable sonar through planner, test sonar, tune the gain, or eliminate other potential causes of sonar noise. The module A0 is connected to flight control A0, while GND VCC can be directly connected with flight control board.
FEATURES
Plug-and-play, no need to modify APM software
Can replace XL-EZ0
The module A0 is connected to flight control A0
GND VCC can be directly connected with flight control board
With installation hole for fixation
20cm to 300cm detection rangeUsage:
Supported Sonars
Building a cable to reduce sonar noise
Connecting the Sonar Sensor on APM 2.x
Connecting the Sonar Sensor on PX4
Mounting the Sonar Sensor
Enabling the Sonar through Planner
Testing the Sonar
Tuning the gain
Sonar maximum altitude
Cold weather performance
Other potential causes of sonar noise
Specifications
Compatible Flight Controller
APM2 2.5 2.6 2.8
Detection Range
20cm-300cm
Dimensions
(1.57 x 1.18 x 0.20)" / (4 x 3 x 0.5)cm (L x W x H)