Item Descriptions:

color:

Olight M1X Striker

Strike bezel model with side switch

The OLIGHT M1X striker is equipped with a new Cree XM - L2 CW LED

It is a compact LED light using two CR123A or one 18650 rechargeable battery.

The windshield lens adopts a transparent lens with high transparency excellent in low reflectivity and irradiates the irradiation light efficiently forward.

We are equipped with a spire-like bezel to protect the lens from the shock at falling edge of the bezel.

CREE XM - L2 equipped MAX 1000 lumens 5 stages dimming + flashing flashing is possible.

It features slender body and bezel with edge.

It is a sharp and aggressive design.

Specification:

LED light: 1 with Pcs Cree XM - L2 CW LED

Material: Aviation aluminum alloy

MAX 1000 lumens

Brightness is 5 kinds:

Turbo: 1000 Lumens / 5 mins + 550 Lumens / 55 mins

High: 350 Lumens / 2 Hrs

MED: 60 Lumens / 12 Hrs

Low: 10 Lumens / 60 Hrs

Moonlight: 0.5 Lumens / 360 Hrs

Strobe: 10 Hz / 1000 Lumens

Waterproof rating: IPX 8

Battery: 1 x 18650 or 2 x CR 123 A / RCR 123 A (batteries not included)

Light irradiation intensity: 9,000 cd

MAX Irradiation distance: approx 190 M / 623 Feet

Full length × Body diameter: 135 mm × 26 mm

Body weight: Approximately 80 g (battery not included)

Warranty period: 5 years

The windshield lens adopts a transparent lens with high transparency excellent in low reflectivity and irradiates the irradiation light efficiently forward.

Method of operation:

By pressing this side switch, it is possible to set dimming and flashing flash.

Although the tail switch can basically switch the mode temporarily with the ON / OFF main switch, the mode set by the side switch is reflected in the constant lighting and intermittent lighting.

In other words, it is always possible to set Hi mode or intermittent flashing mode at any time during intermittent lighting.

The side switch is made of resin and the indicator lamp is built in the center.

I am doing a design with few protrusions from the body, but since the buttons have concentric irregularities, I think that it is easy to understand where the switch is when touching with a finger.

In addition, the indicator lamp does not always light up.

The tail switch is mainly the main switch.

After one click on the tail switch, set the status (4-step dimming and flashing of the flash) with the head mode selector switch.

After setting, intermittent lighting in half can be performed with the set status.

If you want to light the flash intermittently, turn on the auto strobe status by pressing and holding the mode change switch for 1 second after lighting.

After that, even if the main switch is turned off, it will be an auto flash when next lighting.

To cancel, press the mode selector switch to change it.

Also, repeating the tail switch half press twice, you can temporarily activate the auto strobe by repeating the TURBO mode, 3 times.

Hold down the mode selector switch and click the tail switch with one click to enter the low light (moon light) mode.

Tail switch capable of intermittent lighting by halfway pressing.

It lights constantly when it is pushed until a click sound is heard.

Tail switch specifications are also tactical.

First of all, after turning on the headlight, if you set the brightness and mode of the side switch of the head, its brightness will always be reproduced with the tail switch, but if you press the halfway quickly twice, it will be temporarily input to the turbo mode.

Also, if you press quickly 3 times halfway, it will be entered in auto flash mode.

MAX 1000 lumens

Since it is a wide light distribution, it illuminates brightly widely from hand to destination.

I feel good without unevenness.

At the close range, it looks like a strike bezel shaped pentagon is rounded, but it is not a kind of light to use that way, so you have to worry about it.

Because the reflector is shallow, I do not expect so much far-distance irradiation.

Although it is a transition of brightness, turbo mode drops to around 550 lumens in about 5 minutes because of heat dissipation.

Otherwise it will cause the LED to have a short lifetime with heat.

High mode 350 lumens are also sufficiently bright, so Hi mode is sufficient if it is always on.

MAX 1000 Lumens Since it is wide light distribution, it will illuminate brightly from hand to fart!

Almost straight body design if you remove the clip.

Portability is very good.

It is nice to have the size and lightness that you can carry around in a bag etc on a daily basis, it is a simple design!

Package list:

Flash light body * 1

Spare O ring

Battery cover * 1

User Manual * 1

Features:

• Cree XM - L2 LED mounted! Brightness MAX 1000 lumens LED light
• 4 step brightness switching function + strobe mounted, LED flashlight
• Aircraft aluminum alloy construction, protection class IPX-8 (1.5 M), drip-proof, impact resistance is also strong.
• Disaster prevention, climbing, work, recommended for evening fishing!
• It can be used widely for disaster, outdoor, camping, night fishing etc. and work in dark places.
• December 8, 2017 - December 11, 2017 OLIGHT Cyber-monday special sale will be held at amazon Olight Direct JP for the above 4 days.
• Almost all products are sold at a special price of 10 to 40% OFF, so do not miss this opportunity by all means!
• (゚ ∀ ゚) 20% OFF: After ordering the lights of S1R, S1, S1A, SRMINI-II, M1X, S30R II, I3E / above, we will automatically discount based on the cost
• Please do not worry.

Product information:

Shipping Weight: 127 g

Package Dimensions: 4.39 x 6.71 x 18.59 cm