The JJPRO-T1 95mm 180g FPV PNF Carbon Fiber Frame Kits Set Naze32 DSMX/DSM2 8520 Motors 5.8G 800TVL AIO CAV comes ready to fly and requires no assembly or test. Opensource flight control can be customized by players according to their different needs, making the quadcopter suitable for players of all skill levels. Naze32 + DSM2 brush flight control (integration builds) supports mainstream Cleanflight and Baseflight. It adopts 32-bit ARM microprocessor and works at 3.3V/72MHz. With built-in gyro, the controller supports manual and auto modes. Plus, it can be upgraded and customized via micro-USB interface. Integrated DSMX/DSM2 receiver is compatible with Walkera D7 D10 transmitter.<!--Features --><p>FEATURES</p><ul><li> Come ready to fly, require no assembly or test</li><li> Opensource flight control can be customized by players according to their different needs</li><li> Naze32 + DSM2 brush flight control (integration builds) supports mainstream Cleanflight and Baseflight</li><li> 32-bit ARM microprocessor working at 3.3V/72MHz</li><li> Built-in gyro, support manual and auto modes</li><li> Can be upgraded and customized via micro-USB interface</li><li> Integrated DSMX/DSM2 receiver is compatible with Walkera D7 D10 transmitter</li><li> Meet racing standards, RaceBand VTX CAM 40CH transmitter and 1/3 CMOS 800TVL camera, 2-in-1 design</li><li> The images, performance and wide-angle lens of the FPV camera are optimized for FPV application</li><li> One-button switch between NTSC and PAL</li><li> Lightweight carbon fiber frame, sturdy and impact resistant </li></ul><!--Specifications --><p>Specifications</p><table width="100%" border="0" cellpadding="0" cellspacing="0"><tbody><tr><td width="131"> Model</td><td width="365"> JJPRO-T1</td></tr><tr><td width="131"> Frame Material</td><td width="365"> Carbon Fiber</td></tr><tr><td width="131"> Bottom Plate Thickness</td><td width="365"> 1.5mm</td></tr><tr><td width="131"> Upper Plate Thickness</td><td width="365"> 1mm</td></tr><tr><td width="131"> Motor Length Diameter (Shaft Not Included)</td><td width="365"> 20mm</td></tr><tr><td width="131"> Motor Width Diameter</td><td width="365"> 8.5mm</td></tr><tr><td width="131"> Motor Weight</td><td width="365"> 4.8g</td></tr><tr><td width="131"> Flight Control</td><td width="365"> Naze32 + DSM2 Brush Flight Control (Integration Builds)</td></tr><tr><td width="131"> Camera View Angle</td><td width="365"> Horizontal: 150▲, Diagonal: 170▲</td></tr><tr><td width="131"> TV System</td><td width="365"> NTSC/PAL, One-Button Switch</td></tr><tr><td width="131"> Camera Working Voltage</td><td width="365"> 3.6-5.5V</td></tr><tr><td width="131"> Camera Sensor</td><td width="365"> 1/3 CMOS</td></tr><tr><td width="131"> Camera Resolution</td><td width="365"> 800TVL</td></tr><tr><td width="131"> Transmitter System</td><td width="365"> NTSC/PAL</td></tr><tr><td width="131"> Output Impedance</td><td width="365"> 75Ohm</td></tr><tr><td width="131"> Output Signal Strength</td><td width="365"> 12-14dB</td></tr><tr><td width="131"> Transmitter Working Voltage</td><td width="365"> 3.6-5.5V</td></tr><tr><td width="131"> Audio Carrier Frequency</td><td width="365"> 6.5MHz</td></tr><tr><td width="131"> Transmitter Weight</td><td width="365"> 6.8g</td></tr><tr><td width="131"> Dimensions</td><td width="365"> (3.54 x 3.54 x 1.18)" / (9 x 9 x 3)cm (L x W x H)</td></tr><tr><td width="131"> Weight</td><td width="365"> 6.35oz / 180g </td></tr></tbody> </table><!--Package Includes --><p>Package Includes</p><ul><li>1 x Frame (with Aluminum Post & Screw & Motor Coil)</li><li>1 x Naze32 + DSM2 Brush Control (Integration Builds) </li><li>1 x 5.8G CMOS 800TVL 40CH 25mW FPV Camera</li><li>1 x 3.7V 600mAh 30C Lithium Battery</li><li>1 x USB Direct Charging Head</li><li>1 x Spanner</li><li>1 x Attaching Plug</li><li>4 x 8.5*20 Motors</li><li>4 x Motor Coils</li><li>8 x Propellers</li></ul><!--Extra Info --><!--produts_compatibility -->