Item Descriptions:

[Set contents of goods] [1] Film for main display 1 sheet [2] Transparent seal for sub display + Rear camera lens 1 sheet [3] Cleaning cloth (Toray · Toraysee) 1 sheet [4] dust removing sheet 1 sheet

[5] Pasting instructions 1 sheet

【AR coating】

● AR coating treatment: Anti Reflective Coating (coating of antireflection film) The minimum reflectance is 1.1%, the transmittance is 93.4%

● Apply an antireflective coating on the film surface and reduce the reflection of fluorescent lights etc. to about a quarter.

● What is AR coating? ... By coating an extremely thin antireflective film on the film surface, the reflection of the sunlight, fluorescent light, etc. to the liquid crystal screen is reduced by canceling the wavelengths of incident light and reflected light.

Moreover, because it has high transmittance, it improves viewability with clear images intact.

The surface of the film on which AR coating processing is applied looks purple or blue.

[Bubble disappearance]

● Because special adhesive with good air release is used,

Small bubbles and bubbles due to fine dust are absorbed by the adhesive surface and disappear

To do.

● When bubbles remain,

It disappears in about one day and disappears.

Also rubbing with fingers will disappear

【Self adsorption type】

● Silicone sticking is used, so the film sticks itself on pasting.

● When dust and dirt fill up, you can easily remove using adhesive side such as cellophane tape.

● You can also rinse with water.

Since adhesive strength does not deteriorate also in this case, it is possible to reposition.

[Antistatic treatment]

● Antistatic processing is applied to the surface of the film, so it prevents dust and fine dust from adhering.

【High transparency】

● High gloss and high transmittance of 93.4% transmittance, so it does not damage the beauty of the screen.

※ The surface of the AR protective film has "curing film" attached.

Please peel off with a white seal

※ First the finger slipping is bad, but it will become familiar in about one day

【Transparent seal for sub display】

● For rear camera lens + for sub display "strong adhesion" transparent protective seal x with 1 each

● Hard coating Because it is processed, it is difficult to have scratches.

● "Sticky" Transparent protective seal can be repositioned, there is no adhesive residue after peeling off.

Features:

• Please enter model number Confirm this is compatible:
• Bubbles disappearance: Bubbles disappear in about one day.
• If bubbles remain, rub it with fingers and disappear.
• AR coating treatment: Anti Reflective Coating (coating of antireflection film) The minimum reflectance is 1.1%, the transmittance is 93.4%
• What is AR coating ... Apply an antireflective coating on the film surface and reduce the reflection of sunlight etc. to about a quarter.
• For "Substitution" "Transparent Protective Sheet" for Transparent Display + For Rear Camera Lens x 1 each (With AR Protection Film 2 Not)
• For sub display, "SPECIAL ADHESIVE" was changed to the specification, so it covers up to the bent portion

Product information:

Shipping Weight: 9 g

Package Dimensions: 0.41 x 7.59 x 17.91 cm