?JIYI OSD System On Screen Display V1.0 for JIYI P2 &amp;amp; P2 Pro Flight Control<br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /> Description:<br /><br /> Working voltage: &amp;lt;5.3V<br /><br /> Dimension: 31*30*12mm<br /><br /> Weight:12g<br /><br /> <br />  <br /><br /> Features:<br /><br /> Supports JIYI autopilot systems£¬ such as  P2£¬ P2 pro.<br /><br /> Real-time and accurate flight data superposed<br /><br /> Can be powered by JIYI multicopter power module£¬ or individual 5V system<br /><br /> Can be upgraded via USB<br /><br /> During flight£¬ real-time  super-imposed video and flight data information will be shown on your video monitor<br /><br /> The OSD can display multiple flight  information specs including power voltage£¬ flight velocity£¬ height£¬ and distance  from the home point£¬ horizontal attitude£¬ and GPS satellite number and so on.<br /><br />  <br /><br /> OSD Function:<br /><br /> 1. Connection:  Connect TX£¬RX of flight controller COM to RX TX of OSD; Connect Video Signal and GND to AV_IN and GND of OSD; AV_OUT and GND of OSD connect to Screen Displayer; 5V CHx and GND of flight controller connect to 5V and GND of OSD; Power module connect to POW of flight controller<br /><br /> 2. Turn on the camera£¬ output the video siginal<br /><br /> 3. Power on the power module£¬ if the screen displays the changing data£¬ the OSD works normal.<br /><br /> 4. Supply power to OSD via USB£¬ if it installed the driver£¬ the BootLoader of OSD works normal.<br /><br /> 5. The testing of OSD is past if the step 3 and 4 is normal.<br /><br />  <br /><br /> Note: Turn on the camera first£¬ in order to output the video siginal to OSD. Then power on the OSD£¬ it will auto identify the PAL and NTSC. If it doesn't display the data when the OSD is power on£¬ please disconnect the 5V power cable and reconnect £¬ or upgraded it.<br /><br /> <br />  <br /><br /> Package Included:<br /><br /> 1 x OSD