广州线材

Dual-use multi-function cable tester
Automatic scanning mode， quick test， streamlined appearance， ergonomic design. Smooth lines and simple， drop， anti-light design， more in line with the construction site.

Technical Specifications
Test Cable: RJ11， RJ45
Power: DC 9V laminated battery
Power consumption: 25MA
Volume: 10.5 * 10.5 * 2.6 mm
Weight: 200G

First， the function:
1. twisted pair 1，2，3，4，5，6，7，8， G line-by-root (for) test， can determine which distinguish a (for) the wrong line， short circuit and open circuit.
2. Switch ON the normal test speed， "S" is a slow test speed， M is the manual shift.
Second， the twisted-pair test: Turn on the power， the network cable plugs were inserted into both main tester and remote tester host from 1 to G-by lights flashing sequence.
Main Tester: 1-2-3-4-5-6-7-8-G
Remote tester: 1-2-3-4-5-6-7-8-G (RJ45)
1-2-3-4-5-6 ------ (RJ12)
1-2-3-4 ---------- (RJ11)
If the wiring is not normal， according to the following cases show:
1. When a network cable， such as the 3rd line circuit， the main tester and remote tester 3 lights are not bright.
2. When there are several lines unreasonable， then a few lines are off， when the cable is less than 2 wire communication， the lights are not bright.
3. When the two lines out of order， for example， 2，4 lines out of order， the display is as follows:
Main tester unchanged: 1-2-3-4-5-6-7-8-G
Remote tester is: 1-4-3-2-5-6-7-8-G
4. When the network cable has two short circuit， the main tester display is not lit， and remote tester display two lines shorted lights are shimmering， if three or more (including three)
Short circuit is short-circuited a few lights all numbers are off line.
Third， if the measured patch panels and wall seat module， you need two matching jumper root (eg 110P4-RJ45) lead to the tester.