|
Specifications: KVR21N15S8/4 4GB 1Rx8 512M x 64-Bit PC4-2133 CL15 288-Pin DIMM
Kingston Desktop DDR4 RAM 2133Mhz This document describes ValueRAM's 512M x 64-bit (4GB) DDR4-2133 CL15 SDRAM (Synchronous DRAM), 1Rx8, memory module, based on eight 512M x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2133 timing of 15-15-15 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:
• Power Supply: VDD=1.2V Typical • VDDQ = 1.2V Typical • VPP - 2.5V Typical • VDDSPD=2.2V to 3.6V • Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals • Low-power auto self refresh (LPASR) • Data bus inversion (DBI) for data bus • On-die VREFDQ generation and calibration • Single-rank • On-board I2 serial presence-detect (SPD) EEPROM • 16 internal banks; 4 groups of 4 banks each • Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS) • Selectable BC4 or BL8 on-the-fly (OTF) • Fly-by topology • Terminated control command and address bus • PCB: Height 1.23” (31.25mm)
SPECIFICATIONS
CL(IDD) 15 cycles
Row Cycle Time (tRCmin) 46.5ns (min.)
Refresh to Active/Refresh 260ns (min.) Command Time (tRFCmin)
Row Active Time (tRASmin) 33ns (min.)
Power (Operating) TBD W*
UL Rating 94 V - 0
Operating Temperature 0 to 85 degree celcius Storage Temperature -55 to +100 degree celcius
100% manufactured from KINGSTON, Lifetime Warranty from KINGSTON!
|
Package Include :
|