LED Dimmable Human Induction Cabinet Lights Under Cabinet Lighting 12W 900lm12V Warm White Closet Light Under Counter Lights
Brand: YIGER
Material: ABS
LED Lamp Beads: 10pcs SMD2835
Color Temperature: 3000-3500K (Warm White) / 6000-6500K (White)
Size: 19*12.5*3.4CM ( L*W*H )
LED Brightness: 100lm (+/- 20%)
LED Life:> 80000H
Inductive Mode Current: <0.35mA
Working Current: <250mA
Use of the environment: day (dark) or night
IP Rating: Indoor
Inductive way: Mobile sensor
Product Overview:
This product can be installed in a variety of cabinets, wine racks, wardrobe top for decorative lighting and local lighting. Smooth and light design with smart lighting, saving you more space.
Function overview:
【Motion Sensor】 uses thermal infrared sensor technology to detect human activities, sensing to the detection range (the best detection distance of 1.5m) of people or objects move the lights will automatically light up. Leave the sensing range more than 20 seconds after the lights will automatically turn off.
【LED light source】 Use SMD3014 LED lamp beads, environmental protection and energy saving, longer service life.
【Rechargeable Battery】 Lithium-ion battery for energy and support USB interface to repeatedly charge, protect the environment, energy saving and practical.
【USB charging】 620mAh lithium battery powered and supports USB charging.
Switch: On-Off-G. G Indicates the sensing mode. The lamp will illuminate automatically in the dark or when someone or an object approaches the detection range!
Common Problem:
1. The lamp turns off automatically after the power is turned on -> the battery is low, try charging for 2 hours and then use
2. The lamp turns off automatically during use -> The battery is low, try charging for 2 hours and then use
3. Lamp does not light -> Please check whether the switch is on, and check whether the battery is installed
-> Do not place the lamp near the windows, doors and vents, strong air flow will interfere with the induction function of the product
5. Lights dimmed -> The battery is low, try charging for 2 hours and then use
6. Sensor malfunction -> Avoid any object blocking the sensing device.
NOTE:
1. Charging mode
  Connect the USB port of the product to the USB port of your computer or a 500MA (or 1000MA) charger via a USB cable. The red indicator light on the product is charging, green means the battery is full.
2. Low Power Low Power
 When the product is low power supply system may automatically shut down, please pay attention to timely charging. If you do not use this product for a long time
Keep at least one charge per month to extend battery life.
3. Operating temperature is -5 ° C to 40 ° C. If it exceeds this range, the battery will be damaged.
4. This product does not contain water, please avoid the product in a humid environment.
Method One:
Direct adsorption in the iron surface
Method Two:
1. With 3M tape will be attached to the surface of non-iron products
2. This product will be placed in the iron, the use of built-in magnet function of automatic adsorption
The Packing List Contains:
1. LED Sensor Light 1pc
2. Manual 1pc
3. USB Cable 1pc
4 .Iron Tablets 1pc
5. 3M Adhesive 4pcs