贴膜建议：ipad

一:产品特征:
1．进口材料，高透型材质。
2．保护膜表面经耐磨防刮花处理，防刮指数达3H。
3．保护膜经防紫外光线处理,杜绝紫外线对眼睛的伤害.
4．可减少反光达90%,透光率达99%,画面清晰逼真,保护画质色彩不失真。
5．不因时间长而变质,不会像其它粘贴留下腐蚀性胶粘剂在屏幕表面,安全可靠。可重复粘贴，不留任何痕

二:功能
1．有效防止液晶屏幕刮伤及磨损;
2．表面抗静电,不易聚尘被沾污;
3．采用先进的涂布技术,直接碰角不易留下指纹;
4．有特殊防反射,眩光功能,消除98%外在环境的反射光,强眩光d的屏幕比较大，膜是比较难贴，如果是没有经验的朋友，需要让专业的人贴。

Foil recommendations: ipad

A: Product Features:
1. Imported materials, high permeability material.
2. Protective film surface by wear-resistant scratch-resistant treatment, scratch index up to 3H.
3. Protective film by anti-UV light treatment, to prevent UV damage to the eyes.
4. Can reduce the reflective 90%, light transmission rate of 99%, clear and realistic picture, to protect the quality of color without distortion.
5. Not because of the long time and deterioration, not like other stickers left corrosive adhesive on the screen surface, safe and reliable. Can be repeated paste, leaving no marks

Two: function
1. Effectively prevent the LCD screen scratches and wear;
2. Surface antistatic, difficult to dust is stained;
3. The use of advanced coating technology, direct angle is not easy to leave fingerprints;
4. There are special anti-reflection, glare function, to eliminate 98% of the external environment of the reflected light, strong glare d screen is relatively large, the film is more difficult to paste, if it is not experienced friends, need to allow professional people posted.
Recommended the following two film tutorial website, do not know friends can contact contact, there are many Baidu film tutorial. We have time to search to see.

贴膜技巧
第一步，在没有风的室内用干净柔软的布将屏幕擦干净，保证屏幕上没有灰
第二步，准备一点透明玻璃胶带备用
第三步，将转移面揭开卷起小部分
第四步，对准屏幕的边缘将屏贴面吸附在屏幕上
第五步，慢慢将转移面从下面抽出，当然，要看好屏贴面与手机镜面的吸附效果
第六步，完全抽出转移面，如果屏贴有三层，将最上面那层撕掉，贴膜结束
在贴附的过程之中，万一有气泡，注意看气泡下面的灰尘是在手机还是贴膜上，用备用胶带粘掉即可
Foil tips
The first step in the room without the wind with a clean soft cloth to clean the screen to ensure that the screen is not gray
The second step, prepare a little transparent glass tape spare
The third step, the transfer surface will be rolled up a small part
Step 4, Align the screen overlay on the screen
The fifth step, slowly transfer the surface from the following out, of course, to see the screen veneer and mobile phone mirror adsorption effect
Step 6, completely out of the transfer surface, if the screen has three layers, the top layer that layer to tear off, the end of the film
In the process of attaching, if there is a bubble, pay attention to see the bubble below the dust is in the phone or foil, with a spare tape sticky off