This is 1dog system.If you need:
2dogs system，pls click here.
3dogs system，pls click here.
300M Range Rechargeable Shock+Vibra+Electric Dog Collar Trainer
Blue backlight screen 1 dog
This Product Can Control 1 Dog
Color screen， visible at night
MAIN FEATURES
1.Easy -to-use，ergonomic transmitter.
2.Waterproof for bad weather training and keep the collar against wet inside.
3.Rechargeable collar with optional UK，US，AU，EU charger.
4.Rheostat dial that allows for gradual increases in stimulation intensity with no jumps between 0-100 levels.
5.4trainning modes:static shock /vibration/beep/light.
6.The Supertek Element PND998DRLP-1 has a 300 meters range.
7.Two-dog model allows the trainer to control two different dogs from one transmitter.
8.Featured power saving design with automatic standby and memory function.
9.No external antenna on the collar receiver.
10.Reduced receiver/collar is ideal for small/medium size dogs.
HOW TO USE
1.Charge the Remote Transmitter/receiver
1)Connect the charger connector to the charging jack/DC-5v hole.
2)Plug the charger into a standard outlet.
3)The red light on the Transmitter will be lighted.
4)Charge the Transmitter /receiver at least 6 hours for the first charger.
5)After fully charged，the red led will be turned off automatically.
Important Notice:
Low battery indicator:the symbol will show up on the LCD screen.
2.Connect transmitter and receiver:
1) Turn on the Transmitter，by pressing any buttons on the transmitter.
2)Press “1/2” button to choose channel for connection，choose channel 1for the first receiver.
3)Lift the Rubber cover of the Reset Part on the receiver.Press the Reset button inside of the receiver with a pen or paper clip，and the green LED light will turn on.
4)After a beep from the receiver，press the“Y”button on the transmitter within 10seconds.
5)The collar receiver will beep if connected successfully.
6)Press”1/2”button to encode，choose to channel 2 for the second collar by the same procedure.
3.Test static shock function:
1)Attach the light to the metal probes.
2)select to Static Mode-by pressing“Mode”button.
3)Select static level to 1-100 by pressing UP/DOWN button.
4)Press “Y”button，the LED will flash on.
IMPORTANT ADVICE FOR YOUR DOGS SAFETY
Read the complete manual and follow the directions.
This product is not recommended for aggressive or elderly
animals in poor health.
This device is intended for use only on dogs. Never attempt to use
it for any other purpose.
Check the fit of the collar frequently.
Ensure it is not too tight and the probes are just touching the dogs’
neck.
The collar is not intended to be left on the dog for extended
periods without supervision and doing so can lead to health
problems.
A conservative recommended time limit without supervision is 12
hours.
Check the fit to prevent excessive pressure; you should be able to
insert one finger between the collar strap and the dog’s skin.
Wash the dogs neck and the receiver probes weekly with a wash
cloth and mild hand soap and the rinse thoroughly. - 6 -
Examine the dogs neck daily for any signs of irritation，
rash or discomfort.
If signs of skin irritation are noticed， immediately take the receiver
off the dog and apply some antibiotic ointment to help heal and
sooth the area. If the condition persists beyond 48 hours， please
see your veterinarian.
Package included:
1 x Collar receiver
1 x Test light
1 x Transmitter
1 x Adjustable collar strap
1 x Charger
2 x long electric antenna
2 x short electric antenna
1 x User manual
';