Introduction of ceramic series function
Elegant and elegant appearance, elegant and elegant, elegant and elegant, show noble quality.
A hidden stainless steel hot plate with no smell, no non-toxic hygiene and easy cleaning.
Quick and quick, boiling a pot of water can only take 4-6 minutes, 100 degrees of boiling.
It adopts the new type of temperature controller, water vapor induction control, the automatic power failure after the water is opened, the function of the automatic power failure protection.
The 360 degree rotating power connection chassis is flexible and flexible.
Classic burn pattern, very romantic life emotional appeal.
Product certification
Maintenance and removal of scale:
1, when the kettle to use after a period of time, can have some scale in POTS, clean and beautiful, can be used about 200 ml of vinegar, add 400 ml water, pour the mixture into in POTS is heated until boiling, pour out the water after use clean cloth to wipe wall in POTS. (ceramic electric kettle)
2, often clean strainer scale, sundry, dirt soon can rinse with water or with a soft scrub brush} {you can't use metal, furring if too many filter can be removed cleaning, unpick and wash after mesh to put right, not loose.
Helpful hints
The new pot will have a slight odour when it is used and will be removed by itself after three or four times.
For the normal use of the product and extend life, please clean the water on the pot and the heat plate regularly, and suggest to wash it once a month. (ceramic kettle)
Matters needing attention
The power socket is a good three-core socket and needs to be used separately.
When boiling water, do not touch the pot, spout or lid of the pot.
Prohibit the electric kettle to be placed in the heat source, so as not to damage the pot body.
An electric kettle is used only to boil water, and when the water is boiling, do not remove the kettle from the steam.
Water can't be filled with water, or the boiling water can spew out its own safety.
Please cover the lid of the lid. When the water boils, don't move the kettle away, so that the steam will not burn.
Don't fill the kettle with water, or the boiling water can spout and threaten your own safety.
The plug should be plugged from the power socket when not used, and the power cord should be taken care of, so as not to be damaged.
The pot must not be washed in the water, it can only be wiped with dry cloth, wash the swab regularly and wash the scale regularly.
Method of use:
Placement: place the product on flat, firm support.
Fill water: remove the kettle from the base before water injection, and the water injection height should not be lower than the lowest water line, or the highest water line.
3. Place the kettle on the base attached to the power socket.
Press the position of the power switch, indicating the light is on, and the kettle begins to boil water.
When the water is boiling, this product automatically shuts off the power supply. The indicator lamp goes out.
You can also turn off the power at any time during the boiling process.
7, you can turn on the power again when the power is switched off, but you must wait 15 to 20 seconds to cool the temperature sensor before it can be opened again