Please power off to keep you safe when you install the screen,Product compatible with iPhone 6S 4.7''ONLY,not for iPhone 6S plus / 6 Plus 5.5inch
Great replacement for the damaged, scratched,used,broken,cracked, parts.Instructions are NOT provided.
The best way is to find installation videos on YouTube. Be careful when installing and bending the cables.
Should transfer home button with fingerprint sensor,front camera, ear speaker and silver metal plate from your old phone.
Please test the screen first after you received the item,12 months quality warranty for non-human factors.

Technical Details

Product Details

Package Dimensions
Width : 4.02 inch
Height : 0.71 inch
Length : 7.6 inch

Shipping Weight: 0 ounce (View shipping rates and policies)

ASIN : B01J3O7NEE

Product Description

Package
1 x LCD screen replacement for iPhone 6S
1 x repair kit
iPhone,Home button and camera are not included.

If your phone meet some problems like cannot turn on,touch insensitive, flash, lines on screen etc, please follow below steps:
1.Please check the LCD to make sure the flex cables are in good condition and there are no debris on the connectors.
2.Disconnect and reconnect the flex cables from the motherboard side.
3.Then Reboot: Hold buttons (Home, Up volume, and Power button) untill the phone switch down and then switch up again.
4.Make sure for iPhone 6S IOS is upgraded to the latest version.
5.Leave the phone alone for a while in a dry environment. Sometimes there is static after installing that will go away
after some time. Please leave phone alone overnight and see if this problem persists in the morning.
Note:
The new screen replacement have only two flex cables, you should transfer the front camera sensor flex cable and finger sensor flex cable from your old screen, so total four flex cables.Please contact us without hesitate when have any problem before returning this item, as long as the item cannot work, refunded is supported.