Product Description

The DES-1024D 24-Port Fast Ethernet Unmanaged Desktop Switch is designed to enhance workgroup performance while providing a high level of flexibility. Powerful yet easy to use, this device allows users to simply plug any port to either a 10Mbps or 100Mbps network to multiply bandwidths, boost response time and satisfy heavy load demands.

Ideal for Basic Networking Tasks

With the D-Link DES-1024D, you can easily expand your network by adding more computers or devices with speeds up to 200 Mbps per port in full-duplex mode.

Auto-Sensing 10/100 Ports

The DES-1024D use auto-sensing 10/100 Mbps ports, allowing a small workgroup to flexibly connect to 10 or 100 Mbps devices to create an integrated network. Each port automatically adjusts for straight-through or crossover cables to make the right link.

Flow Control for Secure Transmission

802.3x flow control on each port minimizes dropped packets when the port’s receiving buffer is full.

Quality of Service (QoS)

The switches provide 802.1p priority queues for QoS, allowing users to run bandwidth-sensitive applications such as multimedia and VoIP Internet telephone without data flow bottlenecks that can degrade the quality of the network connection.

Save on Energy Costs

The switches support IEEE802.3az EEE which enables the switches to reduce power consumption when the switches are at low utilization, allowing users to save on power usage and costs. During these periods of low utilization, the switches can enter a low-power state and use up less power than regular operations.

Specification

Key Features Inexpensive Fast Ethernet solution for SOHO/SMB
Auto MDI/MDIX crossover for all ports
Store-and-forward switching scheme
Full/half-duplex for Ethernet/Fast Ethernet speeds
IEEE 802.3x Flow Control
Plug-and-play installation
Switching Fabric 4.8 Gbps
Standards IEEE 802.3 10BASE-T Ethernet (twistedpair copper)
IEEE 802.3u 100BASE-TX Fast Ethernet (twisted-pair copper)
ANSI/IEEE 802.3 NWay Auto-Negotiation
IEEE 802.3x Flow Control
ƒIEEE 802.3az EEE function
Protocol ƒƒCSMA/CD

Data Transfer Rates

Ethernet

10 Mbps (half duplex)
20 Mbps (full duplex)

Fast Ethernet
100 Mbps (half duplex)
200 Mbps (full duplex)

Number of Ports ƒƒ24 10/100Mbps Fast Ethernet ports
Topology ƒƒStar

Network Cables

10BASE-T
UTP CAT 3/4/5/5e (100 m max.)
EIA/TIA-586 100-ohm STP (100 m max.)

100BASE-TX
UTP CAT 5/5e (100 m max.)
EIA/TIA-568 100-ohm STP (100 m max.)

Media Interface Exchange ƒƒAuto MDI/MDIX adjustment for all ports
LED Indicators Per port: ƒƒLink/Activity
Per device: ƒPower
Transmission Method ƒƒStore-and-forward
MAC Address Table ƒƒ8K entries per device
MAC Address Learning ƒAutomatic update
Packet Filtering /Forwarding Rates (half duplex) Ethernet: 14,880 pps per port
Fast Ethernet: 148,800 pps per port
RAM Buffer 256 Bytes (2M bits)
Power Input 100~240 V AC 50/60 Hz internal universal power supply

Power Consumption

Power On (Standby)
ƒƒDC input: 1.18 Watts
ƒƒAC input: 2.09 Watts

Max.
ƒƒDC input: 2.72 Watts
ƒƒAC input: 4.14 Watts

Heat Dissipation Power On (Standby) ƒƒAC input: 7.13 BTU/h
Maximum ƒƒAC input: 14.13 BTU/h
MTBF ƒƒ2,058,943 hours
Operating Temperature ƒƒ0 ˚ to 40 ˚C (32 ˚ to 104 ˚F)
Storage Temperature ƒƒ-10 ˚ to 70 ˚C (14 ˚ to 158 ˚F)
Operating Humidity ƒƒ10% to 90% RH non-condensing
Storage Humidity ƒƒ5% to 90% RH non-condensing
Dimensions (W x D x H) ƒƒ280 x 125.8 x 44 mm (11.0 x 5.0 x 1.7 inches)
Certificationsƒ ƒFCC Class A
ƒƒICES-003 Class A
ƒƒCE Class A
ƒƒC-Tick Class A
ƒƒVCCI Class A
ƒƒcUL
ƒƒLVD