Work with Band 13 Verizon 700MHz 4G LTE
The Signal Booster would improves the voice quality and faster 4G Lte in your house and office
Works with all cellular devices:Smartphones, Tablets, Data Cards, and Notebooks
It is better to determine the exact in different location until the highest signal strength is received on your phone(most amount of bars). Once you ascertain the best location then permanently mount the outdoor antenna.Keep the distance between the outdoor antenna and indoor antenna should be above 22ft and make sure a proper amount of physical separation between outdoor antenna and indoor antenna.These things are absolutely critical for this booster to work
FCC authentication certificate

Technical Details

Product Details

Package Dimensions
Width : 7.95 inch
Height : 3.54 inch
Length : 15.51 inch

Shipping Weight: 2.35 pounds (View shipping rates and policies)

ASIN : B01LXYKSXG

Product Description

1.Before bid please make sure your mobile frequency is Verizon 700Mhz 4G LTE in your area.
2.This cell phone signal booster could only make the weak signal stronger,it couldn''t create signal,so the outdoor antenna should receive 2-3 bars of stable signal in the location where the outdoor antenna is mounted,or the booster couldn''t work very well.

Operation Frequency:Band 13
Uplink:776MHz-787MHz,Downlink:746MHz-757MHz
Emission Designator:LTE(G7D)
AGC LEVEL:Uplink:-45.00 Downlink:-56.00
Max.Antenna Gain:Uplink:8.1dBi Downlink:6.6dBi
FCC Classification:B2W/Wideband Consumer Booster(CMRS)

Packing:
Signal Booster Repeater
Indoor Omnidirectional Whip Antenna
Outdoor Directional Yagi Antenna
32ft 5D-FB OD7.5 Coaxial Cable
Screws for Mounting
English User Manual

Installation Guide:
1.Tightly connect the 32ft coaxial cable to the outdoor yagi antenna
2.Check and find a place where your cell phone can receive the best signal outside your house,and keep the outdoor antenna towards the cell phone signal tower
3.Mount the repeater device somewhere inside the house,the repeater should be mounted in a place where is near from the power socket, and have good ventilation.
4.Tightly connect the 32ft coaxial cable to the OUTDOOR port of the repeater
5.Tightly connect the indoor whip antenna on the INDOOR port of the repeater