Specification Kingston Desktop DDR3 RAM 1333Mhz 4GB KVR13N9S8/4 4GB 1Rx8 512M x 64-Bit PC3-10600 CL9 240-Pin DIMM
This document describes ValueRAM's 512M x 64-bit (4GB) DDR3-1333 CL9 SDRAM (Synchronous DRAM), 1Rx8 memory module, based on eight 512M x 8-bit DDR3-1333 FBGA compo- nents. The SPD is programmed to JEDEC standard latency DDR3-1333 timing of 9-9-9 at 1.5V. This 240-pin DIMM uses gold contact fingers. The electrical and mechanical specifica- tions are as follows:
JEDEC standard 1.5V (1.425V ~1.575V) Power Supply • VDDQ = 1.5V (1.425V ~ 1.575V) • 667MHz fCK for 1333Mb/sec/pin • 8 independent internal bank • Programmable CAS Latency: 9, 8, 7, 6 • Programmable Additive Latency: 0, CL - 2, or CL - 1 clock • Programmable CAS Write Latency(CWL) = 7 (DDR3-1333) • 8-bit pre-fetch • Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS] • Bi-directional Differential Data Strobe • Internal(self) calibration: Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%) • On Die Termination using ODT pin • Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C • Asynchronous Reset • PCB: Height 0.740” (18.75mm), single sided component
SPECIFICATIONS
CL(IDD) 9 cycles
Row Cycle Time (tRCmin) 49.5ns (min.)
Refresh to Active/Refresh 260ns (min.) Command Time (tRFCmin)
Row Active Time (tRASmin) 36ns (min.)
Power (Operating) 2.100 W*
UL Rating 94 V - 0
Operating Temperature 0 to 85 degree celcius Storage Temperature -55 to +100 degree celcius
100% manufactured from KINGSTON, Lifetime Warranty from KINGSTON!
|
Package Include :
|