This original WLtoys Q383-A features innovative flight technology and is a machine you can fly just about anywhere. This Q383-A is equipped with a HD camera supports super clear 2.0MP photo taking and 720P video recording, and 5.8G FPV transmission system provides easy and joyful FPV flight.








Features:
5.8G FPV HD camera for 720P fantastic video/2.0MP picture taking
3D eversion, headless mode, one-key return function for cool flying
3.7V 500mAh Li-po battery for about 5 minutes working time
Fantastic design, with flashing LED light, possible for night fly
2.4GHz anti-interference control, the control distance up to 60-80m
Equipped with protective guard ring of the whole body

Specifications:
Brand: WLtoys
Model: Q383-A RC Hexacopter
Material: ABS
Remote control: 2.4GHz / 4 Channels
Gyroscope: six axis
Motor type: coreless motor
Control mode: mode 2
FPV transmission: 5.8G real-time
Display: 4.3in screen display
Camera: 2.0MP photo taking, 720P video recording
Function: 3D flips, CF mode, one-key return, up, down, left, right, turn left, turn right, forward, backward
Remote distance: about 60-80m
Battery for quadcopter: 3.7V 500mAh Li-po
Charging time: about 90mins
Working time: about 5mins
Battery of remote controller: 3.7V 500mAh Li-po (included)
Item dimensions: 180 * 180 * 70mm
Item weight: 72g

Package information:
Package size: 36 * 24 * 8.5cm / 14.2 * 9.4 * 3.3in
Package weight: 809g / 1.8lb
Gift box package

Caution for the battery:
Don't over-charge, or over-discharge batteries.
Don't put it beside the high temperature condition.
Don't throw it into fire.
Don't throw it into water.

Notice:
This RC model is not a toy and is not suitable for children under 14 years old, keep it away from children.
Carefully read the instruction before any use, if you are a beginner, it's advisable to be assisted by an experienced adult.

Package list:
1 * WLtoys Q383-A RC Hexacopter
1 * Remote Controller with 4.3in Screen Display (Mode 2)
2 * 3.7V 500mAh Li-po Battery
1 * 720P HD Camera (Built-in)
1 * USB Charger for Remote Controller
3 * Pair of Spare Propellers
1 * Quadcopter Battery Charger
1 * 4GB Memory Card and Reader 
1 * User Manual

FAQ of the aircraft:
1. The aircraft fail to connect with transmitter.
Before binding, make sure battery is full. Then turn on the drone and the transmitter, the time between these two operation should be finished in 2 seconds.
2. One or more motors don't work.
Drone should stay on a flat surface during the binding, or motor is damaged.
3. Battery problems (can't be charged, swelling, etc).
Battery damaged, suggested to change a new one.
4. Accessories missing.
Check gift box package inside and outside carefully. Contact custom service.
5. The aircraft is out of balance (can't fly, deviation, spinning on the ground).
Check the propeller is installed in the right way.
6. During the charging, battery and charging cable melt.
This USB charger only used for DC current(computer USB port), never connect to AC electric circuit. Besides, pay attention to the charging time, never over charging.