Idea is fine, but ... a little strength

It is very similar to the attachment of the bicycle cyclone. Actually I tried making my own but I was commercialized. There is a knob under the SONY logo. This part is designed to get through with spots. In other words, turn the belt and put it in the main body together with the knob → turn and turn and tighten By the way there is power enough to distort the hardest part of the mouth of the plastic bottle. A similar product has a roll bar mount of Contour (ram mount), but since it uses a hose band, a tool is necessary and it is necessary to unlock all of it once to remove the ring. Besides, it is hard metal to install because it is a hard metal so rubber gets wound so you have to cut the length each time. You can see the rubber image wrapped around the product image, but it is lightly fixed on the back side of the knob and does not need to worry about rubber unlike roll bar mount because it does not cover the band. Great. When removing, you can easily remove it by turning the knob while suppressing the band, because only knobs can be taken. Originally I did not understand why the screw was not cut in the main body, but I tried using it. It is useful enough to surprise you. If you have an optional longer belt, well ... well it's long enough. Even ambiguous ones can be fixed if they are sturdy. The drawbacks are simply simply insufficient in strength. It would be nice if it does not move, but if it is a motorcycle, it will fluctuate to fluffy ... it will shake unless it compensates with camera shake compensation. Since it is the edge of the handle, it is natural, but if it is a ram mount it will do it exactly. Strong ram mount or usability SONY? It is overwhelmingly SONY if you think about the mounting position. GoPro, I think I did well while being pressed by Chinese.

Although it can be fixed to the bicycle frame finally come out, it is regrettable that the pitch can not be operated!

The action cam is high performance even if it is seen worldwide! Rather than modifying it with GOPRO, the captured image itself is beautiful! From the 2016 model there is a 3 times zoom function, and the focus now also fits underwater! This accessory was released this time! When shooting a bike ride image, the helmet exotic keeps the viewpoint changing video, and it gets drunk when you see it! People who are looking at shooting that shakes handles in the same way with the handle fixing will get drunk! Well, the best way to fix it on the bicycle frame! But until now there was no such thing as we had to abandon! Finally got out! Although there is adjustment of the vertical angle of left and right and camera, there is no adjustment of pitch angle! However, if there are many connecting parts, it may cause blurring, so this may be fine! The latest camera shake prevention function! If I make use of this, I think that beautiful shooting will be possible even for small diameter cars! . If you do not squeeze the image too much and do not use the zoom, you can take pictures pretty well! Although it is recommended, it is fatal that you can not change the pitch! It is very disappointing because I wanted to change the pitch without eliminating left and right angle adjustment!

The action cam was mounted on the FR side of the bike.

Prior to this mount, I used a helmet mount on the helmet with the usual reverse direction (camera upside down). Whether the movement of the neck is bad or whether the condition of the helmet is bad is not sure whether the horizontal has come out well, but if you use this it will definitely level out so it is very good. However, as bringing the case to the upper side (about the side of the light), the case of the light appears, so privately ★ 4 ...

I wanted the mount of this hand!

Because it runs Nozan by MTB, it is a convenient mount for attaching to a front fork etc. Other than this, there will not be anything with a large clamp diameter. It is the best to install a 360 degree camera attached to the lower part of the fork. You can shoot your own rides, fork movements, front and back scenery from low position.

Action cam mount

Actually, I bought it to install an action cam of another company's product. It was as expected as I was imagining watching photos. I think that it would be useful if you have an optional extension arm. The fitting accuracy of the knob that applies tension to the belt and the engagement between the belt and the knob is not good.

Unfortunately

Mount height is not enough. It can not be used for VMAX.

It may be useless because it is a genuine product, but I am satisfied with the product

I am satisfied with the product But since it is genuine price is not heard ... For details Sony SONY Roll bar mount VCT-RBM2 C SYHhttps: //www.amazon.co.jp/dp/dp/ B01350CP9U? Tag = dy2com-22 & linkCode; = as1 & creative; = 6339