品名：3m双面胶

规格：0.6cm/0.8cm/1cm/1.5cm/2cm

本店图片都是实物拍摄，每个细节和尺寸尽量满足朋友们的要求，写详细。这样可以让朋友们更加清楚的了解本

产品，就可以放心购买了哦！！

商品简介:3M车体外饰专用胶带独特的粘接力，连同它对不同环境条件及增塑剂的优越抵抗力，形成了最佳、最

持久的实际使用效果。

3M车体外饰专用胶带独特的粘接力，连同它对不同环境条件及增塑剂的优越抵抗力，形成了最佳、最持久的实际使

用效果。广泛应用于汽车外部元件的固定和连接，并被公认为行业界的领先者。

3M车体外饰专用胶带是整个简化生产工艺系统的组成部分，它的操作流程如下：
1、清洁表面：粘结表面须保持绝对清洁干燥，可选用无纤维脱落的布蘸以50%的酒精或异丙醇或丙酮加以擦洗，经

拥挤清洗的表面须待容积彻底挥发后方可使用胶带粘贴。

2、胶带粘贴：操作时应避免手指与胶面的接触，胶袋与零件粘贴后须用力压，以保证胶面的充分接触和润湿。

【安装方法】用酒精将要安装的地方擦干净，撕去标志面的红色底胶，用吹风机将3M胶吹热，对准位置贴在安装位置，

按牢即可，粘贴效果十分牢固。
Name: 3m double-sided adhesive

Specifications: 0.6cm / 0.8cm / 1cm / 1.5cm / 2cm

OUR pictures are taken in kind, every detail and size as much as possible to meet the requirements of friends, write detailed. This allows friends to more clearly understand this

           Products, you can rest assured to buy Oh! The

          Product Description: 3M body exterior tape unique adhesive force, together with its different environmental conditions and plasticizer superior resistance, forming the best, most

           Lasting practical effect.

                      3M body exterior special tape unique adhesive force, together with its different environmental conditions and plasticizer superior resistance, forming the best, most durable reality

           With effect. Widely used in the external components of the car fixed and connected, and is recognized as the industry leader.

          3M body exterior tape is the entire simplified production process system components, its operation process is as follows:
           1, clean the surface: the bonding surface to be absolutely clean and dry, can be used without fiber off the cloth dipped in 50% alcohol or isopropyl alcohol or acetone to scrub,

           The surface of the crowded surface is subject to volume volatilization before use.

           2, tape paste: the operation should avoid finger contact with the plastic surface, plastic bags and parts must be pressed after the pressure to ensure the full contact and wetting the plastic surface.

         【Installation】 Alcohol will be installed to clean the place, tear off the logo surface of the red primer, with a blower to 3M glue blowing heat, alignment position attached to the installation location,

           Press the can, paste effect is very strong.