QUIXX Paint Scratch Remover 2-Step Repair System (for small, medium and also deep scratches!) Irrespective of how careful one is - scratches in paint cannot be permanently prevented. The certified QUIXX Paint Scratch Remover quickly and reliably disposes of scratches, scrapes and traces of paint from all glossy paints (also metallic).

Product Features

• 2-step premium repair system for all depths of scratches
• Proven millions of times and one of the leading paint scratch removers
• Superior effect due to PDT (Plastic Deformation Technology)
• Award winner in various international trade journals
• First paint scratch remover with TÜV certificate for proven effectivity DEKRA test seal of approval for very good effectivity
• Quick and easy application in 2 steps
• Attains results in professional quality, also for deeper scratches
• Can save expensive repairs and aids value retention
• Suitable for all gloss paints and colours (also metallic)
• All-inclusive kit contains everything required to remove scratches
• Premium manufacturers such as BMW and MINI rely on QUIXX quality

Scratch Removal Step-By-Step Before starting to remove scratches from the vehicle, please attentively read the complete instructions and strictly adhere to the instructions to prevent incorrect application.
	Wet the 3000 grit sandpaper included in the repair kit. Gently sand the damaged spot for a maximum of 15 seconds. Do not attempt a 2nd sanding. Never sand the same area for more than 15 seconds maximum. Failure to comply with this warning could result in the removal of the entire clear coat or paint, which would leave behind stains. In case of light scratches skip step 1.
	Remove any water and grinding residues and simply apply a small amount of QUIXX REPAIR Tube #1 to the scratch.
	Polish the area with QUIXX REPAIR #1 and the included polishing rag for about 2 minutes applying a lot of pressure. Do this at a right angle to the scratch until all traces have vanished completely. The polishing pastes that are part of the QUIXX REPAIR system work better and more quickly if you apply more pressure during the polishing process.
	Remove any REPAIR #1 residue using a moist rag and apply a small amount of QUIXX FINISH Tube #2 to the scratch.
	Now polish the area with QUIXX FINISH #2 and the second enclosed polishing rag for about 2 minutes, applying a lot of pressure. Use circular motions until the area has a glossy appearance.
ATTENTION! Important additional information: 1) Never sand the same area for more than 15 seconds maximum. Failure to comply with this warning could result in the removal of the entire clear coat or paint, which would leave behind stains. 2) The polishing pastes that are part of the QUIXX REPAIR system work better and more quickly if you apply more pressure during the polishing process.