low price item!!! Please buy over S$9.9 storewide， single order will not process， thanks for your understanding

Name: plastic gun DSH-D type
Power: 1000W
Work: Split
Rated voltage: 220V
DSH-D-type plastic welding gun double insulated， safe and reliable; simply connect 220V AC， can be plastic processing operations， welding plastic gun heater power can be mobilized in a wide range to meet the different materials and different plastics Specifications welding electrode temperature requirements， according to different requirements， dress different nozzles， in addition to welding， but also to the plastics thermoforming， docking and other operations， but also other departments as required hot air heating hot air source.
 Purpose: plastic gun suitable for injection molding top white handle， plastic hardware return processing， plastic welding repair processing， integrated circuit welding， overhaul process and wider use of electronic chemical industry.
 Use and precautions:
1. initial use， flame or smoke may occur after this is a normal phenomenon， power 5 minutes will automatically disappear.
2. The plastic sheet is heated to 130-140 degrees becomes soft state， a little pressure to the molding soldering temperature is generally about 240 degrees away from the solder nozzle orifice at a temperature of about 200 to 260 degrees 5-10MM; welding should pay attention to the distance between the nozzle and the solder joints. to achieve the desired welding temperature.
3. The heating wire off， shot shell rotatable connecting screws， remove the gun batteries， with the same specifications of the gun the core can be replaced.
The gun used up to light， so as not to break the core portion gun refractory ceramic material， leaving the electric wire shorted.