SUPER MINI ELM327 Wifi for IOS & Android

Please note:

It only works with car (does not support truck).

Latest software version V1.5. ELM327 is not universal, it can't all of the cars especially cars before 2005 year. it is wireless and worked only through a WIFI on com

Wifi ELM327 interface is able to detect and interpret obd2 / eobd protocols automatically. It also provides support for high speed communications and a low power sleep mode. It use AT commands to communicate with a host device (PC, notebook, for iOS). There are plenty of software packages available, which are fully compatible with this tool. Some of them have pretty useful features, such as engine running parameters monitoring, DTC reading and clearing, MPG meter, etc. You can even write your own software on a specified hardware platform if you wish, because the AT commands are fully documented and very well explained. This tool is only 2.7 x 1.25x 0.9 inches, and it comes with a 6 ft OBDII cable for easy installation. It also includes a power switch built-in to prevent the need for having to constantly disconnect your unit from the OBDII port. It is compatible with 1996 and later vehicles which are obd2 or eobd compliant. Connecting to your iPhone / iPod touch is made by WIFI connection in adHoc mode.

With proper software installed in the host device, you may have following parameters read out from your vehicle:

Vehicle Speed

RPM

Fuel Consumption

Engine Coolant Temp

Fuel Pressure

Calculated Engine Load

Throttle Position

Intake Manifold Pressure

Air Intake Temp

Timing Advance

Mass Air Flow

Fuel Level

Barometric Pressure

EVAP System Vapor Pressure

Fuel Trim

Note:

Your vehicle may not support all above parameters.How many parameters you can get is depended on the vehicle manufacturer’s implementation.

Multi-Protocol Support

ISO 9141-2 (5 baud init, 10.4 kbaud)

ISO 14230-4 KWP (5 baud init, 10.4 kbaud)

ISO 14230-4 KWP (fast init, 10.4 kbaud)

ISO 15765-4 CAN (11 bit ID, 500 kbaud)

ISO 15765-4 CAN (29 bit ID, 500 kbaud)

ISO 15765-4 CAN (11 bit ID, 250 kbaud)

ISO 15765-4 CAN (29 bit ID, 250 kbaud)

SAE J1939

Hardware requirements:

PC/for iPhone/for iPod/for iPod Touch/for iPad

Important: Your PC requires wireless LAN router supporting WiFi 802.11 a/b/g for linking.

Software Requirements:

- All ELM327 based software

- For iOS base software in Apple store: Rev / FUZZYCar / DashCmd / SpeedPORT / Nova Scan

Attention:For iOS base software are not included you must buy from Apple App Store! we only offer PC version software & Instructions manual (on the CD)

Vehile list:
This device can support multi-brands Cars (supports Gasoline cars, can not supports Die sel &Truck),but it doesn't work with all gasoline cars ,and we can not and IMPOSSIBLE test it on all thecars, we can not make sure whether it can be used on your car.

Maybe you can but one to have a try.
Or if u can not sure and do not want to try ,please do not buy ,we do not want bad reviewe .
Thanks for your understand in advance !
If u do not agree with above,please do not order it .Thanks in advance :)

packing

1 x super mini 327 wifi
1 x CD software

Manufacturer Specifications
Save on maintenance costs.
No power supply needed, just connect to your car

SUPER MINI ELM327 Wifi for IOS & Android

Please note:

Firmware V1.5 can support more car types and has less problems than the firmware V2.1 version, is more stable and has longer working life than V2.1. And it supports all obd2 protocols.

1. Mini WiFi ELM327 Descriptions

Mini WiFi ELM 327 can be used on IOS and Android syetem smart phone PC and so on...

Mini WiFi ELM 327 auto checker is able to detect and interpret these protocols automatically.

It also provides support for high speed communications and a low power sleep mode.

It uses AT commands to communicate with a host device(PC, notebook, IOS, Smart phone and so on). There are plenty of software package available, which are fully compatible with WI-FI OBD AUTO Checker. Some of them have pretty useful features, such as engine runnign parameters monitoring, DTC reading and clearing, MPG meter, etc.

You can even write your own software on a specified hardware platform if you wish, because the AT commands are fully documented and are very well explained.

2. Mini WiFi ELM327 Technical Specifications

1. SSID: CLKDevices

2. IP: 192.168.0.10

3. Subnet: 255.255.255.0

4. Port: 35000

5. Range: 50 ft (Line of sight)

6. Antenna: Internal

7. Power Consumption: 0.75 Watts (With Power Switch)

8. Wifi Standard: 802.11a/b/g

9. Operating Temperature: -15 to 100 Deg Celsius

10. Plastic: Automotive Grade

11. Physical Dimensions: 2.75 x 1.25 x 1.2 inches

3. Mini WiFi ELM327 Supports OBD2 protocols

ISO 9141

ISO 11898(aka. CAN)

ISO 14230(aka. KWP2000)

ISO 15765(aka. CAN)

SAE J1939

4. Mini WiFi ELM327 Functions

Elder OBD compatible vehicles has a sticker indicates that the vehicle is OBD compatible. Model year 1996 and newer vehicles are compliant by default, and will not have this sticker.

There are some of parameters which could be read from the vehicles:

Vehicle Speed

RPM

Fuel Consumption*

Engine Coolant Temp

Fuel Pressure

Calculated Engine Load

Throttle Position

Intake Manifold Pressure

Air Intake Temp

Timing Advance

Mass Air Flow

Fuel Level

Barometric Pressure

EVAP System Vapor Pressure

Fuel Trim

5. Mini WiFi ELM327 Supports Multi Brand Cars

It works on OBD2 vehicles ,but it is impossible for us to test it on all kinds cars. we are not sure whether it could comply with your cars or not. If you have not used the product before ,you could have a try. If you dont wanna have a try, please think twice before buying.

Thank you for your understanding.

6. Packing List

1pc x Mini WIFI ELM327 OBD2 Scanner

1pc x CD Driver