The E15 is a trapezoidal, two-way loudspeaker using a 15-inch, 500W, die cast aluminum frame woofer with a 3.5-inch voice coil. It is intended for use when high-power and authoritative low-end are needed from a full-range loudspeaker. A 2.8” compression driver attached to the 75° DMTTM waveguide assures that even distant listeners will be well covered.
E Series loudspeakers will perform very well with any quality, professional power amplifier – but by taking advantage of the complete E Series Entertainment System, more performance and options are available. Today’s powered loudspeakers rely on finely tuned digital signal processing (DSP) to achieve a higher level of performance. When used with QSC GXD or PLD amplifiers or with a QSC TouchMix digital mixer, E Series loudspeakers can also take advantage of advanced DSP. QSC has developed E Series DSP settings for all three platforms. These settings support a variety of applications including live sound reinforcement (with and without subwoofers), stage monitoring, dance music and karaoke.
FEATURES
- High output, professional quality sound with E15 – 500 W continuous power
- E Series Entertainment System – Advanced digital signal processing tunings and options using QSC GXD, PLD amplifiers or TouchMix digital mixers.
- E Series Entertainment System DSP Tunings are now available for PLD, CXD and GXD processing amplifiers:
- For PLD/CXD visit Amplifier Navigator Software
- For GXD visit the GXD Firmware Updater
- Titanium diaphragm for high fidelity and long life
- Rugged tour-grade textured paint
- Foam-lined perforated steel grill
- Available U-Style Yoke and M8 rigging kit for permanent installation
- Dual angle pole socket
SPECIFICATIONS
|
Model |
E15 |
|
Configuration |
1 x 15-inch, 2-way, non-powered |
|
Frequency Response (-6 dB) |
55Hz – 20kHz |
|
Frequency Range (-10 dB) |
43Hz – 20kHz |
|
Power capacity²: continuous/peak |
500 W / 2000 W |
|
Sensitivity |
97 dB, 1 W @ 1 m |
|
Coverage Angle |
75° conical DMT |
|
Output1 (peak SPL @ 1 m) |
130 dB |
|
Drivers LF HF |
381 mm (15-inch) driver with 89 mm (3.5-inch) voice coil 38 mm (1.5-inch) exit, 71 mm (2.8-inch) voice coil, compression driver |
|
Nominal Impedance |
8Ω |
|
Cross-over |
Full-range only 1.55 kHz |
|
Input connectors |
2 x NL4, 1 x barrier strip |
|
Enclosure |
Trapezoidal, plywood, black texture paint finish. Two side-mounted handles, Perforated, powder-coated steel grille with foam lining. |
|
Mounting and suspension |
6 x M8 suspension points, dual angle, 35 mm pole-socket |
|
Net weight |
31 kg / 68 lbs |
|
Shipping weight |
34 kg / 75 lbs |
|
Dimensions |
420 x 716 x 445 mm 16.5 x 28.2 x 17.5 in |
|
|
|