This original HISKY HCP80V2 is a fantastic mini 6CH 3D RC helicopter. It's flybarless design and built-in 6 axis gyroscope free to switch between 3D mode and 6G mode, making it can be both stable and agile perfect for 3D fun fly. And with it's mini size and lightweight, it's perfect to fly both indoor and outdoor. Great choice for both beginners and experienced pilots.







Features:
Delicate fuselage design, and attractive painting.
Flybarless system with 6-axis gyro for fast and stable flight performance.
Strong and high tenacity engineering plastic material features great crashworthiness.
3 pcs linear servo which is durable and strong.
6CH control able to perform remarkable 3D flight.

Specifications:
Brand name: HISKY
Item name: HCP80V2 Helicopter
Channels: 6 Channels
Transmitter: HISKY H-6 Transmitter 2.4G Mode 2
Function: Forward/backward, up/down, left/right, hovering, sideward fly, 3D inverted fly
Remote distance: 150m
Working time: 5-6 minutes
Battery for helicopter: 3.7V 180mAh Li-po battery
Battery weight: 4.8g
Battery dimension: 25 * 12 * 6mm
Charging time: about 30 minutes
Battery for remote controller: 4 * AA battery (not included)
Main Rotor Diameter: 210mm
Tail Rotor Diameter: 38mm
Body Length: 215mm
Height: 80mm
Item weight: 32g

There might be some deviation due to manual measurement.

Caution for the battery:
Don't over-charge, or over-discharge batteries.
Don't put it beside the high temperature condition.
Don't throw it into fire.
Don't throw it into water.

Notice:
This RC model is not a toy and is not suitable for children under 14 years old, keep it away from children.
Carefully read the instruction manual before any use, if you are a beginner, it's advisable to be assisted by an experienced adult.
The helicopter is equipped with coreless motor, continuous use of different batteries is not suggested.

Package information:
Package size: 31 * 24 * 10.5cm / 12.2 * 9.5 * 4.1in
Package weight: 746g / 1.64lb
Gift box package

Package list:
1 * HCP80V2 Helicopter
1 * Transmitter (mode 2)
1 * 3.7V 180mAh LiPo Battery
1 * Charger
1 * Spare Main Blades
1 * Tail rotor
1 * Spare rods pack
1 * Screws Pack
1 * Screw Driver
1 * Hex Wrench
2 * English Manual

FAQ of the aircraft:
1. The aircraft fail to connect with transmitter.
First, battery fully charged, then power on the drone and the transmitter within 2 seconds.
2. One or more motors don't work.
When binding, drone on flat surface, or motor damaged.
3. Accessories missing.
Check gift box package inside and outside carefully, or contact custom service.
4. The aircraft is out of balance (can't fly, deviation, spinning on the ground).
Check the propellers is installed in the right way.
5. During the charging, battery and charging cable melt.
USB charger only for DC computer USB port, never for AC circuit and remember never over-charging.