This 2.4 GHz WLAN signal booster is designed for IEEE 802.11b/g/n wireless LAN applications. It adopts the direct sequencespread spectrum(DSSS) and orthogonal frequency division multiplexing(OFDM) technology of WLAN communication. The productis compatible with time-division duplexing(TDD) method of WLAN and using rapid microwave detection technology to providehigh linearity amplification. The signal booster can work with most WLAN/WiFi devices,Bluetooth, ZigBeeand increase the WLAN signalstrength, therefore a larger WLAN coverage and more stable transmission rate.
Features:
20X the power, improving the link quality and coverage of certified WLAN devices.
3.0dB ultra-low noise.
Wide 6-18V operating input range.
Working with certified IEEE 802.11b/g/n wireless LAN devices.
Simply plug and play, no software is required.
Specifications:
Frequency range: 2.4-2.5GHz
Operating voltage: 6-18V
Receiving gain: 10dB±1
Transmission gain: 17dB±1
Input trigger power: 3dBm(min), 30dBm(max)
Max output power(P1dB): 37dBm(5W)
EVM: 3％@29dBm 802.11g 54Mbps OFDM 64QAM BW 20MHz
DC supply current: 625mA@ Pout 29dBm 12V
Noise figure: ＜3.0dB
TX/RX switch time delay: ＜1us
LED indicator: Transmitter: green, receiver: red
Operating ambient temperature: -40→~70→
Operating humility: Up to 95％ rel. humidity
Item size: 10.3 * 9.6 * 2.1cm / 4.05 * 3.77 * 0.82in (L * W * H)
Item weight: 462g / 1.018Lb
Package size: 19 * 16.5 * 6.5cm / 7.48 * 6.49 * 2.55in (L * W * H)
Package weight: 693g / 1.529Lb
Applications:
Wireless LAN 802.11b/g/n access point clients.
Based on the 2.4GHz WLAN wireless base stations.
Based on the 2.4GHz WLAN wireless bridges.
Indoor distribution systems (multi-play) in the combiner.
Based on ZigBee, Bluetooth protocol wireless devices.
Installation Instructions:
Step1: Disconnect the power supply to AP/Router.
Step2: Detach the antenna from your certified wireless AP/Router.
Step3: Connect RG316 cable (included) to the booster and AP/Router.
Step4: Connect the antenna to the other end of the booster.
Step5: Connect the power supply to the booster first and subsequently the AP/Router.
Package List:
1 * 5W signal booster
1 * Power adapter
1 * 20cm RG316 cable
1 * 5dBi antenna
1 * User manual (English)