Features:
Can't work alone, need work with the access controller panel
Waterproof: IP65-68
Stylish exterior design
Stable performance
RS232 or RS485 Format Data Output
Function: Identification
Frequency: Low frequency
Distance reading range: 3-15cm
Card Type: EM-ID 125kHz proximity card reader
Less than 0.2 second Response Speed
Less than 0.5 seconds Proximity Time
Built-in Antenna
Built-in LED (Double Color LED)
Built-in Loud Speaker (Buzzer)
100 Meters Communication Distance
Real Time Data Transfer
PVC Case Material (Black Resin for Water-Proof Function)
Specifications:
Working Voltage: DC 12V
Working Current: 70mA
Support card type: 125 kHz ID Card
Data Output Format: RS232 or RS485
Ambient Temperature: -25C to 75C
Ambient Humidity: 10%-90%
Proximity Range: 5-10cm
Material: ABS
Color: Dark Grey
Size: 80x42x12.5(mm)/3.15x1.65x0.49in
Weight: 60g/0.11lb/1.76oz
Installation
Using + type screw driver to loosen the screw between the panel and motherboard. And then embed the motherboard to the side wall with the plastic plug and screws.

Notice
1. Confirm the electric voltage (DC12V) and differentiate
ositive anode and cathode of power supply
2. When external Power is used, make sure sharing the power with Controller Box or using the same GND
3. When the distance between card reader and controller is more than 50m, please use Power Line with at least 1.5 square cm Dia, or using several parallel Network wires

(RS232 Serial Settings)

Baud Rate 9600 8 1 N

"8" is data bits "1 " is stop bit," N" is none check bit

Card number sending are: 02 30 30 30 30 0D 0A 03
Above are our Rreader sending card number Standard Format
(If you have any special request in the format,pls leave message.)

"02" is start, "30,30,30,30" are four-byte hexadecimal ASCII code card number
"0D0A" is Space + Enter, "03" is terminator