BH-02 Bluetooth headphone Stereo Headphone Stereo Wireless
Bluetooth Headset
 
 
 
 
SPECIFICATIONS
Model no
BH-02
Ver.
Bluetooth V2.1+EDR
Bluetooth Profiles
HSP,HFP,A2DP,AVRCP
Effective Range
10Meters
Music Time
10 Hours
Talk Time
11Hours
Standby Time
Up to 250 Hours
Iuput
DC : 5V/180mAh
Charge Time
3 Hour
Dimensions
14.5*10*6CM
 
 
 
 
About BH-02
BH-02 is a stereo headset with Bluetooth technology. It supports the following Bluetooth profiles:
HSP —— Headset Profile
HFP —— Hands-free Profile
A2DP—— Advanced Audio Distribution Profile
AVRCP——Audio/Video Remote Control Profile
Overview
 
  
 
 
 
 
 
 
1
Retractable string
2
< key :last song
3
key :next song
4
LED Indicator
5
Multifunction button (MFB): answer, end and reject call, pause and play
6
+ key: volume up
7
 key: volume down
8
Charging port
9
Built-in microphone
 
Charging the battery with USB cable
Warning:
 
How to use
A Switching on / off headset
Function
Operation
LED indicator
Indication tone
Switch on
Press and hold the MFB for 3 seconds
Blue LED is on for 1 second
“Do Do Do” tone
Switch off
Press and hold the MFB for 6 seconds
Red LED is on for 1 second
“Do Do DO” tone
 
B Pairing the headset with Bluetooth devices
A) How to enter pairing mode
Be sure BH-02 in power off status first. Press and hold the MFB for 6 seconds, till Red and blue Led blink alternately, or you hear the indication “Do Do” twice come out. And then release the MFB. The unit will become pairing mode.
 
B) Pairing the headset with Bluetooth mobile phone
Please make sure your mobile phone has Bluetooth function that can be used.
Specific pairing procedures were not the same with different mobile phone. Please refer to your mobile phone manual for further information. Steps as follows:
  1. Please keep the headset and mobile phone in the range of 1 meter when pairing.
  2. Start the Bluetooth function of mobile phone and search the Bluetooth devices.
  3. Make the headset enter into pairing mode (Please refer to “how to enter into pairing mode”).
After searched, select “BH-02”in the Bluetooth device list.
  1. According to indication, enter password or PIN No:”0000”, and press the key of” Yes” or “confirmed”.
  2. After successful pairing, select “BH-02” in the Bluetooth device list, and press “connect”.
  3. After successful connecting, the blue LED of the headset quickly blinks twice or three times every 4 seconds.
Wearing the headset
The string of this headset is retractable, please adjust according to the actual use. Logo “L” of headset represents left ear, Logo “R” of headset represents right ear. Please wear the headset according to the indication of the Logo.
 
 
 
Making calls with the headset
Function
Status of headset
Operation
Voice dial
Standby mode
Press and hold MFB for 2s, release it till hearing indication sound
Redial last number
Standby mode
Short press MFB twice quickly
Volume up
Conversation mode
Short press or long press + key. When the volume is adjusted to max, you will hear an indication tone.
Volume down
Conversation mode
Short press or long press – key. When the volume is adjusted to min, you will hear an indication tone.
Answer calling
Ringing
Short press MFB
Reject calling
Ringing
Press and hold MFB for 1s, and release it till hearing indication sound
 
Warning: Excessive pressure from headphones can cause hearing loss.
Notes:
 
Playing music
When the headset connects with the mobile phone or Bluetooth transmitter which supports A2DP, you can enjoy music through headset wirelessly.
Function
Status of headset
Operation
Pause
Playing music
Short press MFB
Play
Pausing
Short press MFB
Last song
Playing music
Short press < key
Next song
Playing music
Short press> key
Volume up
Playing music
Short or long press + key. When the volume is adjusted to max, you will hear an indication tone.
Volume down
Playing music
Short or long press – key. When the volume is adjusted to min, you will hear an indication tone.
 
Notes: .
 
LED indicator
  1. Charging
LED indicator
Status of the headset
Red LED is on
Charging
Blue LED is on
Finish charging
 
B) In use.
LED Indicator
Status of the headset
Red and blue LEDs blink alternately
Pairing mode
Blue LED quickly blinks once every 2 seconds.
Not connected to a device
Blue LED gradually turns on and off
Conversation mode
Red LED blinks twice every 20 seconds
Low power
 
G Re-connecting to a Bluetooth device
  1. Automatic connecting
Every time the headset is switched on, it will connect to the nearest, and the last connected device automatically.
  1. Manual connecting to last connected device
When the headset is in standby mode and doesn’t connect to any devices, short press MFB button once, it will connect to last connected device automatically.
 
 

 
 
 

Shipping 

We only ship to your confirmed address. Please make sure your shipping address is correct before purchase.Most orders will be shipped out within 1-3 business days upon payment confirmation.While there will be a delay for something we can not control (such as the bad weather). If it happens, just contact our customer service, we will help you check and resolve any problem. 

Taxes & Charges  

Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to buyingWe can revise the invoice price as you requested for reduce taxes.

Feedback

Once you have received your item, please leave positive feedback for us as this will inform us that you have received your items. If you are dissatisfied with your purchase, in any way , please contact us first prior to leaving feedback.We always work out problems to our buyers full satisfaction. Trust us ,all the issues could be resolved via communication. And we care our customers ,we love happy customers .if you have any doubt or issue with the order ,please feel free to contact us ,we are here to assist you!

Contact us

We care about our valued buyers, if you have any questions, we try our best to reply to your emails as soon as possible, however, due to high volume of daily incoming emails and time zone difference, we may not be able to reply your emails immediately. Please allow 24 business hours for us to response.